Ninth International Conference on

MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE

Main Conference page MSMF9
in Brno, Czech Republic
June 26 - 28, 2019
Main Conference page
FEMS CSNMT FME BUT CEITEC ESIS ESIS

Main Conference page Ninth International Conference on
Materials Structure & Micromechanics of Fracture
MSMF9, in Brno, Czech Republic, June 26 - 28, 2019

Full list of authors

click to paper-code to display respective timetable

    Author's name   Contributions
Abuzaid WaelCM90182 A Study on Sub-grain Strain Heterogeneities at 298K and 77K for the CoCrNi Entropy Alloy
Adámek JanCM90175 Effect of Annealing at 700 °C on Hardness of Cold-formed 08Ch18N10T Steel
Ahadi AylinCM90091 Grain Boundary Influence on the Mechanical Response to Tensile Loading for Nano-sized Cu Beams Modelled by MD Simulations
Aifantis Elias C.CM90272 Nonsingular Gradient and Fractional Fracture Mechanics
Albina Jan-MichaelCM90154 Coarse-grained Molecular Dynamics Simulation of Deformation and Fracture in Polycarbonate: Effect of Loading Mode, Strain Rate, Temperature and Molar Mass
Antoš ZdeněkCM90120 Interaction of Stacking Faults in Zincblende GaN Stabilized by Epitaxial Strain
Antunes FernandoCM90263 Characterisation of Fatigue Crack Growth using the CJP Model of Crack Tip Fields or Plastic CTOD
CM90259 3D Numerical Study of the Transient Behaviour on Plasticity Induced Crack Closure
CM90235 Crack Tip Mechanisms: A Numerical Analysis
Araki SatoshiCM90210 Evaluation of Hall-Petch Coefficient with Critical Grain Boundary Shear Stress Measured by Nanoindentation in Ferritic Steel
Aravindh S. AssaCM90176 Fracture Mechanical Behaviour of 0.3C Direct-quenched and Partitioned Steels
Arbeiter FlorianCM90104 Toughness Improvement of Brittle Polymer by Insertion of Soft Interlayers
Armstrong DavidCM90234 Damage Mechanisms in Highly Oriented Pyrolytic Graphite, Studied by High Temperature Nano-indentation
Artamonov MaximCM90124 The Investigation of the of Fatigue Crack Growth Mechanism in Powder Formation Ni-based Superalloy
CM90125 The Influence of Temperature and Stress Cycle Asymmetry at Fatigue Cracks Initiation and Propagation in Cylindrical Specimens of Ni-based Alloy EP741NP
Asayama KaitoCM90078 Observations of Twinning and Detwinning in Magnesium Alloy by Synchrotron Radiation DCT and EBSD
Azeez AhmedCM90098 Low Cycle Fatigue Modelling of a Steam Turbine Rotor Steel
CM90099 Characterisation of Deformation and Damage in a Steam Turbine Steel Subjected to Low Cycle Fatigue
Babinský TomášCM90219 Effective and Internal Stresses in 713LC and Rene 41 Superalloys using Analysis of the Hysteresis Loop Shape
Bacaicoa InigoCM90063 On the Role of Fe-content on the Damage Behavior of an Al-Si-Cu Alloy
Balueva AllaCM90102 Modeling Binding Energy and Adhesive Strength in Novel Bio-active Nano Coatings on Dental Implants
Banov MichaelCM90070 Durability Diagnostic of Turbine Blades Based on Non-destructive Acoustic Emission Testing
Barai Sudhirkumar V.CM90128 A Generalized Model towards Predicting Monotonic and Cyclic Deformation Behavior of Cyclically Stable Materials
Barakhtin BorisCM90140 The Structure of Iron Powder Aggregation Obtained by Selective Laser Melting
Barényi IgorCM90226 Investigation of Mechanical Properties of Hard Finish Turned and Grinded Surfaces
CM90227 Structure Evolution of 33NiCrMoV15 Steel after its Processing by Various Quenching Conditions
Bartosik MatthiasCM90166 Mechanical Properties and Dislocations in CrN/TiN Superlattices from ab initio Calculations
CM90163 Understanding the Relationship between Structural and Mechanical Properties of Metastable Superlattices
CM90214 Toughness Enhanced Transition Metal Nitride Thin Films
Baumegger WalterCM90188 Metallic Superlattices with Naturally Sharp Interfaces: A Case Study of Immiscible Ti-Ta System
Bertolla LucaCM90183 Nano-objects (Nanotubes, Nanosheets): Do They Toughen Brittle Matrices?
Berto FilippoCM90081 Numerical Evaluation of Plasticity Induced Crack Closure in 3D Structures
Betzwar Kotas AgnieszkaCM90109 On Crack Propagation in Homogeneous and Composite Materials under Mixed Mode Loading Conditions
Bezold AlexanderCM90190 Numerical Modeling of the Progressive Damage in the Microstructure of WC-Co Hardmetals under Fatigue Loading
Bhattacharya AmritaCM90151 Phonons and Lattice Thermal Conductivities of Graphene Family
Bing YangCM90263 Characterisation of Fatigue Crack Growth using the CJP Model of Crack Tip Fields or Plastic CTOD
Blason SergioCM90135 Evaluation of S355 Fatigue Properties Based on Castillo-Canteli et al. Model
Bleicher KevinCM90215 Microstructural Influences on the Fatigue Crack Initiation and Propagation Mechanisms in Hypo-eutectic Al-Si Cast Alloys
Bobyr VitaliyCM90140 The Structure of Iron Powder Aggregation Obtained by Selective Laser Melting
Bodnárová LucieCM90060 Effect of Doping on Elastic Properties of Alloys Exhibiting Nanotwinning: Theory and Experiment
Boev AleksandrCM90142 Modeling Fatigue Life of Structural Materials under Block-type Nonsymmetrical Loading
Boev EvgeniyCM90134 A Damaged Medium Model for Describing a Creep Damage Accumulation Process
Bogdanowicz ZdzisławCM90243 Initiation and Development of 1.4539 Austenitic Steel Welded Joints Made with TIG Method and with Laser Beam
Bogusz PawełCM90244 The Influence of Shot Peening on Structure and Mechanical Properties of 5457 Aluminium Alloy Joints Welded with TIG Method
Borges MichaelCM90235 Crack Tip Mechanisms: A Numerical Analysis
Botvina LyudmilaCM90230 Interrelation between Mechanical, Physical and Damage Parameters at Fracture of Steels
Botvina Lyudmila RCM90231 The Effect of Stress Concentration and Material Structure on the Kinetics of Damage Accumulation
Bouček VáclavCM90105 Mechanical Alloying of Fe-Al-Si Intermetallic Compounds using Pure and Pre-alloyed Powders
Branco RicardoCM90235 Crack Tip Mechanisms: A Numerical Analysis
Broeckmann ChristophCM90190 Numerical Modeling of the Progressive Damage in the Microstructure of WC-Co Hardmetals under Fatigue Loading
Bronnikov SergeyCM90143 A Computational Study of the Mixed–mode Crack Behavior by Molecular Dynamics Method and the Multi-parameter Crack Field Description of Classical Fracture Mechanics
Broult ThierryCM90153 Properties of CdZnTe and HgCdTe Determined by Indentation
Brož PetrCM90206 Assembling Fracture Mechanics and Fatigue Strength
Brueckner-Foit AngelikaCM90196 Determination of Crack Initiation in an Interior Cold-weld by Combining Reverse Engineering and Digital Image Correlation Analysis
CM90063 On the Role of Fe-content on the Damage Behavior of an Al-Si-Cu Alloy
Buchinger JulianCM90163 Understanding the Relationship between Structural and Mechanical Properties of Metastable Superlattices
CM90214 Toughness Enhanced Transition Metal Nitride Thin Films
Buhagiar JosephCM90080 Neutron Investigation of Nitinol Stents and Massive Samples before and after PIRAC Coating
Burago NikolayCM90090 Study of a Multiaxial Cyclic Loading with Determination of Critical Plane for an Arbitrary Shift of Phases
CM90089 Continual Models of Layered and Block Media with Slippage and Delamination
Burkov MikhailCM90118 DIC-based Investigation of Crack Growth and Fatigue Fracture in Metal Alloys under Static and Cyclic Tension
Burzić Z.CM90271 Determining of Paris Coefficients for Different Regions of a P460Nl1 Steel Welded Joint
Buslaps ThomasCM90239 Plastic Zone Evaluation in a Bainitic Steel Compact Tension Specimen through X-ray Diffraction
Byakov AntonCM90118 DIC-based Investigation of Crack Growth and Fatigue Fracture in Metal Alloys under Static and Cyclic Tension
Calmunger MattiasCM90098 Low Cycle Fatigue Modelling of a Steam Turbine Rotor Steel
CM90191 TWIP and Fracture Behavior in a Nickel Base Alloy: At Room Temperature and Below
CM90112 Effect of Additive Manufacturing on Fatigue Crack Propagation of a Gas Turbine Superalloy
CM90099 Characterisation of Deformation and Damage in a Steam Turbine Steel Subjected to Low Cycle Fatigue
CM90156 Influence of Ageing on Out-of-phase Thermomechanical Fatigue of Austenitic Stainless Steels
Camas DanielCM90239 Plastic Zone Evaluation in a Bainitic Steel Compact Tension Specimen through X-ray Diffraction
CM90259 3D Numerical Study of the Transient Behaviour on Plasticity Induced Crack Closure
Campbell ChasenCM90102 Modeling Binding Energy and Adhesive Strength in Novel Bio-active Nano Coatings on Dental Implants
Campbell JohnCM90068 The Origin of Fractures
Canteli AlfonsoCM90135 Evaluation of S355 Fatigue Properties Based on Castillo-Canteli et al. Model
Cao WeiCM90176 Fracture Mechanical Behaviour of 0.3C Direct-quenched and Partitioned Steels
Cardona Carlos IvanCM90222 Finite Element Analysis of Crack-tip Opening Displacement and Plastic Zones Considering the Cyclic Material Behavior
Carrera Díaz ManuelCM90239 Plastic Zone Evaluation in a Bainitic Steel Compact Tension Specimen through X-ray Diffraction
Cassar GlennCM90080 Neutron Investigation of Nitinol Stents and Massive Samples before and after PIRAC Coating
Chai GuocaiCM90191 TWIP and Fracture Behavior in a Nickel Base Alloy: At Room Temperature and Below
CM90156 Influence of Ageing on Out-of-phase Thermomechanical Fatigue of Austenitic Stainless Steels
Chen WeinongCM90202 High-speed X-ray Visualization of Bone Fracture
Chen YingCM90242 First-principles Analysis of Structure and Stability in RFe12-based Compounds
Chen ZhuoCM90214 Toughness Enhanced Transition Metal Nitride Thin Films
Chernobaeva AnnaCM90197 Forecasting Radiation Embrittlement of VVER-1000 RPV Weld’s Metal
Chlupová AliceCM90270 Interaction of Pulsating Water Jet with Austenitic Steels
Chlup ZdeněkCM90083 Slip Activity in High-purity Chromium Single Crystals Compressed at 77 K
CM90211 Properties of BaTiO3/Al2O3 Laminate Structure by Nanoindentation
CM90229 Mechanical Properties of the Cantor‘s High Entropy Alloy with Fine Grain
CM90213 Behaviour of Partially Pyrolysed Composite Reinforced by Fibres of Various Compositions
CM90183 Nano-objects (Nanotubes, Nanosheets): Do They Toughen Brittle Matrices?
Chocholoušek MichalCM90139 Environmentally Assisted Crack Initiation in Heavy Liquid Metals
Chugunov OlegCM90254 Radiation Degradation Mechanisms of Reactor Graphites Properties
Ctibor PavelCM90158 Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Silicate Attack
CM90161 Influence of Isothermal Oxidation on Microstructure of YSZ and Mullite-YSZ Thermal Barrier Coatings
Čapek JanCM90067 Influence of the Solute Concentration on Twinning-detwinning Process in Mg-Al alloys
Čapek JaroslavCM90054 ZnMg0.8Ca/Sr0.2 Ternary Alloys – the Influence of the Third Element on Material Properties
CM90057 Microstructure and Mechanical Properties of Potentially Biodegradable Ternary System Zn-Mg0.8-Ca0.2
Čech JaroslavCM90105 Mechanical Alloying of Fe-Al-Si Intermetallic Compounds using Pure and Pre-alloyed Powders
Čelko LadislavCM90185 Thermal Cycling Behaviour of Plasma-sprayed Thermal Barrier Coatings with Pre-oxidized NiCrAlY and NiCoCrAlY Bond-coats
CM90158 Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Silicate Attack
CM90161 Influence of Isothermal Oxidation on Microstructure of YSZ and Mullite-YSZ Thermal Barrier Coatings
Černá MarieCM90209 Fatigue Properties and Damage Mechanisms of Components Manufactured by Laser Additive Welding of H13 on H11 Steels
Černý IvoCM90209 Fatigue Properties and Damage Mechanisms of Components Manufactured by Laser Additive Welding of H13 on H11 Steels
Černý MartinCM90213 Behaviour of Partially Pyrolysed Composite Reinforced by Fibres of Various Compositions
Černý MiroslavCM90110 Atomistic Models of Fracture
CM90251 Ab-initio Aided Strain Gradient Elasticity Theory - an Efficient Tool in the Fracture Nanomechanics?
CM90245 Determination of Strain Gradient Elasticity Constants
Čmakal JosefCM90136 Microstructure and Damage Processes in a Nickel-based Alloy Exposed to Molten Glass
Čolić KatarinaCM90065 Fracture and Fatigue Behaviour of Implants Made of Ti Alloys
Dallaev RashidCM90256 Microstructural Investigation of Defects in Photovoltaic Cells by the Electron Beam-induced Current Method
CM90258 Investigation of Structure of AlN Thin Films using Fourier-transform Infrared Spectroscopy
Daniel RostislavCM90188 Metallic Superlattices with Naturally Sharp Interfaces: A Case Study of Immiscible Ti-Ta System
Danninger HerbertCM90109 On Crack Propagation in Homogeneous and Composite Materials under Mixed Mode Loading Conditions
Dashevskiy IliaCM90102 Modeling Binding Energy and Adhesive Strength in Novel Bio-active Nano Coatings on Dental Implants
Das Gour PrasadCM90151 Phonons and Lattice Thermal Conductivities of Graphene Family
Debono MatthiasCM90080 Neutron Investigation of Nitinol Stents and Massive Samples before and after PIRAC Coating
Destefanis VincentCM90153 Properties of CdZnTe and HgCdTe Determined by Indentation
Detemple EricCM90177 Monte Carlo Simulation of Microstructure Development during Thermo-mechanical Treatment of HSLA Steels
Diaz F. A.CM90263 Characterisation of Fatigue Crack Growth using the CJP Model of Crack Tip Fields or Plastic CTOD
Dlhý PavolCM90106 Methodology for Estimation of Residual Stresses in Hardened Railway Axle
CM90137 Design of Plastic Pipes Considering Content of Recycled Material
Dlouhý IvoCM90183 Nano-objects (Nanotubes, Nanosheets): Do They Toughen Brittle Matrices?
CM90171 Threshold Fracture Stress: Theory and Application
Dluhoš JiříCM90198 A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading
Domagała LucynaCM90152 Resistance of Insulating-structural Concretes to High Temperature
Drahokoupil JanCM90054 ZnMg0.8Ca/Sr0.2 Ternary Alloys – the Influence of the Third Element on Material Properties
Drdlík DanielCM90211 Properties of BaTiO3/Al2O3 Laminate Structure by Nanoindentation
Drozdenko DariaCM90067 Influence of the Solute Concentration on Twinning-detwinning Process in Mg-Al alloys
Dusza JánCM90095 Nano-mechanical Characteristics of Advanced Ceramics
Du C.CM90241 Unravelling Micro-plasticity Mechanisms in Martensite, Ferrite, and Dual-phase Steel
Eckert MarošCM90226 Investigation of Mechanical Properties of Hard Finish Turned and Grinded Surfaces
Egami TakeshiCM90262 Deformation Properties of Metallic Glasses
Engelberg Dirk LCM90101 Parametric Study of Cohesive ITZ in Meso-scale Concrete Model
Enzinger RobertCM90132 High-precision Isothermal Dilatometry as a Tool for Quantitative Analysis of Precipitation Kinetics in Dilute Al-Mg-Si Alloys
Erak DmitryCM90197 Forecasting Radiation Embrittlement of VVER-1000 RPV Weld’s Metal
Eremin AlexanderCM90118 DIC-based Investigation of Crack Growth and Fatigue Fracture in Metal Alloys under Static and Cyclic Tension
Eriksson RobertCM90098 Low Cycle Fatigue Modelling of a Steam Turbine Rotor Steel
CM90112 Effect of Additive Manufacturing on Fatigue Crack Propagation of a Gas Turbine Superalloy
CM90099 Characterisation of Deformation and Damage in a Steam Turbine Steel Subjected to Low Cycle Fatigue
CM90156 Influence of Ageing on Out-of-phase Thermomechanical Fatigue of Austenitic Stainless Steels
Fajkoš RostislavCM90106 Methodology for Estimation of Residual Stresses in Hardened Railway Axle
Fehlbier MartinCM90063 On the Role of Fe-content on the Damage Behavior of an Al-Si-Cu Alloy
Fides MartinCM90211 Properties of BaTiO3/Al2O3 Laminate Structure by Nanoindentation
Fintová StanislavaCM90107 Fatigue Properties of B1914 Superalloy at High Temperatures
CM90108 Interaction of Fatigue and Creep in MAR-M 247 Superalloy
Foldyna JosefCM90270 Interaction of Pulsating Water Jet with Austenitic Steels
Foletti StefanoCM90165 Strain Localizations in Notches for a Coarse-grained Ni-based Superalloy: Simulations and Experiments
Ford MichaelCM90064 Progress and Challenges with Local Approaches to Cleavage Fracture
Frank AndreasCM90137 Design of Plastic Pipes Considering Content of Recycled Material
Friák MartinCM90184 An ab initio Study of Thermodynamic and Mechanical Stability of Heusler-based Fe2AlCo Polymorphs
CM90194 A First-principles Study of Pressure-induced Iso-structural Transition in YN and ScN Characterized by a Reversal in their Elastic Anisotropy
CM90260 Ab-initio Study of Alloying Effect of Titanium and Carbon on Young’s Modulus of Mo5SiB2 (T2) Phase
CM90251 Ab-initio Aided Strain Gradient Elasticity Theory - an Efficient Tool in the Fracture Nanomechanics?
CM90075 Structure and Magnetism of Grain Boundaries and Surfaces in Ferromagnetic Metals and Intermetallics
CM90193 Tensorial Elastic Properties and Stability of Interface States Associated with Sigma5(210) Grain Boundaries in Ni3(Al,Si)
CM90163 Understanding the Relationship between Structural and Mechanical Properties of Metastable Superlattices
CM90201 Mechanical Properties of Interfaces in Fe-Al Nanocomposites under Complex Multiaxial Loading
Frolov AlexCM90254 Radiation Degradation Mechanisms of Reactor Graphites Properties
Gamanov ŠtěpánCM90131 Fatigue Crack Growth Rate in Axial, Torsional and Multiaxial Mode in 316L Austenitic Steel
Geers M. G. D.CM90241 Unravelling Micro-plasticity Mechanisms in Martensite, Ferrite, and Dual-phase Steel
Geisert AndreasCM90063 On the Role of Fe-content on the Damage Behavior of an Al-Si-Cu Alloy
Gejdoš PavelCM90185 Thermal Cycling Behaviour of Plasma-sprayed Thermal Barrier Coatings with Pre-oxidized NiCrAlY and NiCoCrAlY Bond-coats
Gerbe SaschaCM90215 Microstructural Influences on the Fatigue Crack Initiation and Propagation Mechanisms in Hypo-eutectic Al-Si Cast Alloys
Germain LionelCM90177 Monte Carlo Simulation of Microstructure Development during Thermo-mechanical Treatment of HSLA Steels
Giertler AlexanderCM90216 The Significance of Grain Size, Segregations and Inclusions for the Very High Cycle Fatigue Fatigue (VHCF) Behavior of Tempered Martensitic Steels
Golubev V.CM90089 Continual Models of Layered and Block Media with Slippage and Delamination
Gonzalez-Herrera AntonioCM90259 3D Numerical Study of the Transient Behaviour on Plasticity Induced Crack Closure
Gröger RomanCM90092 Slip Behavior of Two Interacting 1/2<111> Screw Dislocations in bcc Metals under Uniaxial Load
CM90087 Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles for Bio-applications
CM90083 Slip Activity in High-purity Chromium Single Crystals Compressed at 77 K
CM90120 Interaction of Stacking Faults in Zincblende GaN Stabilized by Epitaxial Strain
Grünewald PatrickCM90178 Methodology of Acquiring Fatigue Crack Growth Curves from Micro Bending Beams as a Tool for Investigating Crack-microstructure Interactions
Gruszczyński MaciejCM90205 Shrinkage and Strength for Cement Mortars with Addition of Amorphous Aluminum Silicate
CM90086 The Research of Mortars Shrinkage Made with Reclaimed Aggregate
Guo ZheruiCM90202 High-speed X-ray Visualization of Bone Fracture
Gurovich BorisCM90254 Radiation Degradation Mechanisms of Reactor Graphites Properties
Hadaš ZdeněkCM90225 Crack Propagation Analysis in Multilayer Piezoelectric Energy Harvester
Hadraba HynekCM90211 Properties of BaTiO3/Al2O3 Laminate Structure by Nanoindentation
CM90229 Mechanical Properties of the Cantor‘s High Entropy Alloy with Fine Grain
Hahn RainerCM90163 Understanding the Relationship between Structural and Mechanical Properties of Metastable Superlattices
Halasová MartinaCM90213 Behaviour of Partially Pyrolysed Composite Reinforced by Fibres of Various Compositions
Hansson PerCM90091 Grain Boundary Influence on the Mechanical Response to Tensile Loading for Nano-sized Cu Beams Modelled by MD Simulations
Hatzenbichler LukasCM90166 Mechanical Properties and Dislocations in CrN/TiN Superlattices from ab initio Calculations
CM90188 Metallic Superlattices with Naturally Sharp Interfaces: A Case Study of Immiscible Ti-Ta System
Haušild PetrCM90105 Mechanical Alloying of Fe-Al-Si Intermetallic Compounds using Pure and Pre-alloyed Powders
CM90175 Effect of Annealing at 700 °C on Hardness of Cold-formed 08Ch18N10T Steel
Heczko OlegCM90060 Effect of Doping on Elastic Properties of Alloys Exhibiting Nanotwinning: Theory and Experiment
Heller LuděkCM90268 Thermomechanically Transforming Notched NiTi Thin Ribbon: Effect of Martensitic Transformation on Stress and Strain Gradients
Hengge ElisabethCM90132 High-precision Isothermal Dilatometry as a Tool for Quantitative Analysis of Precipitation Kinetics in Dilute Al-Mg-Si Alloys
Herrero DiegoCM90200 Crack Closure in the Near-threshold Region in Metallic Materials
He JianyingCM90240 Design and Fabrication of Super-low Ice Adhesion Surfaces
Hirakata HiroyukiCM90073 Fracture Criteria for Nanoscale Stress Singularity in Brittle Materials
Hlaváček PetrCM90270 Interaction of Pulsating Water Jet with Austenitic Steels
Hloch SergejCM90270 Interaction of Pulsating Water Jet with Austenitic Steels
Hoefnagels JohanCM90241 Unravelling Micro-plasticity Mechanisms in Martensite, Ferrite, and Dual-phase Steel
Hohenwarter AntonCM90264 Fracture Toughness of Tungsten: Fracture Mechanism, Experiments, and Simulations
CM90218 Fatigue Crack Propagation in Elongated Ultrafine-grained Structures
Hojná AnnaCM90139 Environmentally Assisted Crack Initiation in Heavy Liquid Metals
CM90179 Effect of High Temperature Water / Vapour Environments and Strain Rate on Crack Initiation of 316L Steel
Holec DavidCM90184 An ab initio Study of Thermodynamic and Mechanical Stability of Heusler-based Fe2AlCo Polymorphs
CM90166 Mechanical Properties and Dislocations in CrN/TiN Superlattices from ab initio Calculations
CM90194 A First-principles Study of Pressure-induced Iso-structural Transition in YN and ScN Characterized by a Reversal in their Elastic Anisotropy
CM90193 Tensorial Elastic Properties and Stability of Interface States Associated with Sigma5(210) Grain Boundaries in Ni3(Al,Si)
CM90188 Metallic Superlattices with Naturally Sharp Interfaces: A Case Study of Immiscible Ti-Ta System
CM90163 Understanding the Relationship between Structural and Mechanical Properties of Metastable Superlattices
CM90201 Mechanical Properties of Interfaces in Fe-Al Nanocomposites under Complex Multiaxial Loading
CM90214 Toughness Enhanced Transition Metal Nitride Thin Films
Holzer JakubCM90083 Slip Activity in High-purity Chromium Single Crystals Compressed at 77 K
Horníková JanaCM90198 A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading
Horník VítCM90107 Fatigue Properties of B1914 Superalloy at High Temperatures
CM90108 Interaction of Fatigue and Creep in MAR-M 247 Superalloy
Hosová KláraCM90057 Microstructure and Mechanical Properties of Potentially Biodegradable Ternary System Zn-Mg0.8-Ca0.2
Hrbáček KarelCM90136 Microstructure and Damage Processes in a Nickel-based Alloy Exposed to Molten Glass
CM90107 Fatigue Properties of B1914 Superalloy at High Temperatures
CM90108 Interaction of Fatigue and Creep in MAR-M 247 Superalloy
Hrstka MiroslavCM90174 Notch Tip Singularities of Elastic Piezoelectric Bi-materials
Hsu Wei-NengCM90249 Multiaxial Loading of Metallic Sheets within Scanning Electron Microscope
Huang YongfangCM90263 Characterisation of Fatigue Crack Growth using the CJP Model of Crack Tip Fields or Plastic CTOD
Hutař PavelCM90222 Finite Element Analysis of Crack-tip Opening Displacement and Plastic Zones Considering the Cyclic Material Behavior
CM90081 Numerical Evaluation of Plasticity Induced Crack Closure in 3D Structures
CM90180 Small Crack Propagation in 316L Steel
CM90181 Description of Short Fatigue Crack Propagation under Low Cycle Fatigue Regime in Sanicro 25 Steel
CM90106 Methodology for Estimation of Residual Stresses in Hardened Railway Axle
CM90200 Crack Closure in the Near-threshold Region in Metallic Materials
CM90137 Design of Plastic Pipes Considering Content of Recycled Material
CM90107 Fatigue Properties of B1914 Superalloy at High Temperatures
CM90108 Interaction of Fatigue and Creep in MAR-M 247 Superalloy
Hyodo KatsutoshiCM90103 Evaluation of Pinning Force on Edge Dislocation due to C and N Atoms in Iron by Molecular Dynamics Simulation
Igumnov LeonidCM90134 A Damaged Medium Model for Describing a Creep Damage Accumulation Process
CM90142 Modeling Fatigue Life of Structural Materials under Block-type Nonsymmetrical Loading
Ilić N.CM90271 Determining of Paris Coefficients for Different Regions of a P460Nl1 Steel Welded Joint
Inui HaruyukiCM90053 Single-crystal Mechanical Properties of Equiatomic CrMnFeCoNi High-entropy Alloy and its Derivative Equiatomic Quaternary and Ternary Medium-entropy Alloys
James NeilCM90263 Characterisation of Fatigue Crack Growth using the CJP Model of Crack Tip Fields or Plastic CTOD
Janoušek JaromírCM90179 Effect of High Temperature Water / Vapour Environments and Strain Rate on Crack Initiation of 316L Steel
Jech DavidCM90185 Thermal Cycling Behaviour of Plasma-sprayed Thermal Barrier Coatings with Pre-oxidized NiCrAlY and NiCoCrAlY Bond-coats
CM90158 Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Silicate Attack
CM90161 Influence of Isothermal Oxidation on Microstructure of YSZ and Mullite-YSZ Thermal Barrier Coatings
Jedlička MichalCM90186 On Automation of XFEM Computations Considering General Shapes of Cracks in Terms of the Stress Analysis of Spatial Structures
Jiang KengCM90190 Numerical Modeling of the Progressive Damage in the Microstructure of WC-Co Hardmetals under Fatigue Loading
Jiroušková KateřinaCM90084 3D Fractography of Fatigue Fractures
Jivkov AndreyCM90064 Progress and Challenges with Local Approaches to Cleavage Fracture
CM90101 Parametric Study of Cohesive ITZ in Meso-scale Concrete Model
Johansson StenCM90156 Influence of Ageing on Out-of-phase Thermomechanical Fatigue of Austenitic Stainless Steels
Jovičić R.CM90271 Determining of Paris Coefficients for Different Regions of a P460Nl1 Steel Welded Joint
Kantanen PekkaCM90176 Fracture Mechanical Behaviour of 0.3C Direct-quenched and Partitioned Steels
Karlík MiroslavCM90105 Mechanical Alloying of Fe-Al-Si Intermetallic Compounds using Pure and Pre-alloyed Powders
Karolczuk AleksanderCM90074 Recent Progress in Application of Multiaxial Fatigue Criteria to Lifetime Calculations
CM90079 Validation of Multiaxial Fatigue Criteria Application to Lifetime Calculation of S355 Steel under Plane Stress State
Kasberger RolandCM90207 Design of Composites with Improved Fracture Toughness
Kawulok PetrCM90116 Modelling the Hot Deformation Behavior of AlSi1MgMn Alloy via Flow Stress Models Utilizing Intelligent Algorithms
Kawulok RostislavCM90116 Modelling the Hot Deformation Behavior of AlSi1MgMn Alloy via Flow Stress Models Utilizing Intelligent Algorithms
Keckes JozefCM90188 Metallic Superlattices with Naturally Sharp Interfaces: A Case Study of Immiscible Ti-Ta System
Kec JanCM90209 Fatigue Properties and Damage Mechanisms of Components Manufactured by Laser Additive Welding of H13 on H11 Steels
Kerlain AlexandreCM90153 Properties of CdZnTe and HgCdTe Determined by Indentation
Keršner ZbyněkCM90208 Evaluation of Fracture Response of Silesian Granite Specimens via Effective Crack Model Approach and Finite Element Analysis
Khatibi GoltaCM90109 On Crack Propagation in Homogeneous and Composite Materials under Mixed Mode Loading Conditions
CM90199 New Method for Evaluating Weld Overlays Exposed to Combined Wear and Dynamic Loads
Kikuchi ShoichiCM90078 Observations of Twinning and Detwinning in Magnesium Alloy by Synchrotron Radiation DCT and EBSD
Kimura KenCM90094 Dislocation Strengthening Mechanism in High Nitrogen Austenitic Steel
Kirchgassner MartinCM90199 New Method for Evaluating Weld Overlays Exposed to Combined Wear and Dynamic Loads
Kishida KyosukeCM90053 Single-crystal Mechanical Properties of Equiatomic CrMnFeCoNi High-entropy Alloy and its Derivative Equiatomic Quaternary and Ternary Medium-entropy Alloys
Kitamura TakayukiCM90073 Fracture Criteria for Nanoscale Stress Singularity in Brittle Materials
Klakurková LenkaCM90185 Thermal Cycling Behaviour of Plasma-sprayed Thermal Barrier Coatings with Pre-oxidized NiCrAlY and NiCoCrAlY Bond-coats
Kluger KrzysztofCM90079 Validation of Multiaxial Fatigue Criteria Application to Lifetime Calculation of S355 Steel under Plane Stress State
Klusák JanCM90135 Evaluation of S355 Fatigue Properties Based on Castillo-Canteli et al. Model
Kolednik OtmarCM90207 Design of Composites with Improved Fracture Toughness
CM90104 Toughness Improvement of Brittle Polymer by Insertion of Soft Interlayers
Kolyvoshko EugeneCM90141 Nanodevice Lifetime Prediction – the Challenge for Nano-and Micromechanics
Komarov PavelCM90158 Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Silicate Attack
Kömi JukkaCM90176 Fracture Mechanical Behaviour of 0.3C Direct-quenched and Partitioned Steels
Konečná RadomilaCM90069 Fatigue Properties of Materials Manufactured by Direct Metal Laser Sintering
CM90162 On the Link between As-built Surface Quality and Fatigue Behavior of Additively Manufactured Inconel 718
Kopeček JaromírCM90105 Mechanical Alloying of Fe-Al-Si Intermetallic Compounds using Pure and Pre-alloyed Powders
Koschellla KevinCM90216 The Significance of Grain Size, Segregations and Inclusions for the Very High Cycle Fatigue Fatigue (VHCF) Behavior of Tempered Martensitic Steels
Kotoul MichalCM90251 Ab-initio Aided Strain Gradient Elasticity Theory - an Efficient Tool in the Fracture Nanomechanics?
CM90228 Influence of the Cell Geometry on the Tensile Strength of Open-cell Ceramic Foams
CM90174 Notch Tip Singularities of Elastic Piezoelectric Bi-materials
CM90245 Determination of Strain Gradient Elasticity Constants
CM90275 Prediction of Unstable Fracture of Nanocomponents using ab initio Aided Strain Gradient Elasticity
Kotrechko SergiyCM90141 Nanodevice Lifetime Prediction – the Challenge for Nano-and Micromechanics
CM90171 Threshold Fracture Stress: Theory and Application
Koutná NikolaCM90163 Understanding the Relationship between Structural and Mechanical Properties of Metastable Superlattices
CM90214 Toughness Enhanced Transition Metal Nitride Thin Films
Kovalčíková AlexandraCM90211 Properties of BaTiO3/Al2O3 Laminate Structure by Nanoindentation
Kozák VladislavCM90146 Computational Analysis of Crack Formation and Propagation in Quasi-brittle Fibre Reinforced Composites
CM90171 Threshold Fracture Stress: Theory and Application
Král PetrCM90136 Microstructure and Damage Processes in a Nickel-based Alloy Exposed to Molten Glass
Kraus TobiasCM90265 How to Reinforce Pulsed Electrodeposited Nanocrystalline Nickel by Gold Nanoparticles to Improve the Microstructural Stability
Krbaťa MichalCM90227 Structure Evolution of 33NiCrMoV15 Steel after its Processing by Various Quenching Conditions
Kroupa PavelCM90194 A First-principles Study of Pressure-induced Iso-structural Transition in YN and ScN Characterized by a Reversal in their Elastic Anisotropy
Kruml TomášCM90180 Small Crack Propagation in 316L Steel
CM90270 Interaction of Pulsating Water Jet with Austenitic Steels
CM90131 Fatigue Crack Growth Rate in Axial, Torsional and Multiaxial Mode in 316L Austenitic Steel
Krupp UlrichCM90215 Microstructural Influences on the Fatigue Crack Initiation and Propagation Mechanisms in Hypo-eutectic Al-Si Cast Alloys
CM90216 The Significance of Grain Size, Segregations and Inclusions for the Very High Cycle Fatigue Fatigue (VHCF) Behavior of Tempered Martensitic Steels
Kubásek JiříCM90054 ZnMg0.8Ca/Sr0.2 Ternary Alloys – the Influence of the Third Element on Material Properties
CM90057 Microstructure and Mechanical Properties of Potentially Biodegradable Ternary System Zn-Mg0.8-Ca0.2
Kuběnová TerezaCM90087 Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles for Bio-applications
CM90083 Slip Activity in High-purity Chromium Single Crystals Compressed at 77 K
Kubík PetrCM90056 Drawbacks of the Lode Dependent Plasticity Model in the Prediction of Deformations under Tension
Kubo AtsushiCM90160 First-principles Analysis of Deformation and Fracture Properties of Semiconductors
CM90154 Coarse-grained Molecular Dynamics Simulation of Deformation and Fracture in Polycarbonate: Effect of Loading Mode, Strain Rate, Temperature and Molar Mass
Kučera JaroslavCM90137 Design of Plastic Pipes Considering Content of Recycled Material
Kuleshova EvgeniaCM90197 Forecasting Radiation Embrittlement of VVER-1000 RPV Weld’s Metal
Kuleshov DenisCM90254 Radiation Degradation Mechanisms of Reactor Graphites Properties
Kumari MamtaCM90138 The Role of Substructural Features on the Deformation and Fracture Behavior of bcc and fcc High Entropy Alloys
Kunz FrancescoCM90159 Thermal Stability, Phase Decomposition and Micro-fatigue Properties of Pulsed Electrodeposited Nanocrystalline Co-Cu
CM90265 How to Reinforce Pulsed Electrodeposited Nanocrystalline Nickel by Gold Nanoparticles to Improve the Microstructural Stability
Kunz LudvíkCM90069 Fatigue Properties of Materials Manufactured by Direct Metal Laser Sintering
CM90107 Fatigue Properties of B1914 Superalloy at High Temperatures
CM90108 Interaction of Fatigue and Creep in MAR-M 247 Superalloy
Kureš MiroslavCM90167 A Characterization of Sliding Vectors by Dual Numbers, Some Dual Curves and the Screw Calculus
Kusák IvoCM90055 Change in the Sensory Properties of Alkali Activated Slag Mortars
Kuznetsov PavelCM90140 The Structure of Iron Powder Aggregation Obtained by Selective Laser Melting
Kvapilová MarieCM90136 Microstructure and Damage Processes in a Nickel-based Alloy Exposed to Molten Glass
Landa MichalCM90060 Effect of Doping on Elastic Properties of Alloys Exhibiting Nanotwinning: Theory and Experiment
Laub MarcCM90177 Monte Carlo Simulation of Microstructure Development during Thermo-mechanical Treatment of HSLA Steels
Lauschmann HynekCM90084 3D Fractography of Fatigue Fractures
Le Bourhis EricCM90153 Properties of CdZnTe and HgCdTe Determined by Indentation
Lebedev VasilyCM90080 Neutron Investigation of Nitinol Stents and Massive Samples before and after PIRAC Coating
Lederer MartinCM90109 On Crack Propagation in Homogeneous and Composite Materials under Mixed Mode Loading Conditions
Leidermark DanielCM90112 Effect of Additive Manufacturing on Fatigue Crack Propagation of a Gas Turbine Superalloy
Lejček PavelCM90082 Recent Achievements and Challenging Drifts in Grain Boundary Segregation
Lenart MałgorzataCM90205 Shrinkage and Strength for Cement Mortars with Addition of Amorphous Aluminum Silicate
CM90086 The Research of Mortars Shrinkage Made with Reclaimed Aggregate
Lesiuk GrzegorzCM90135 Evaluation of S355 Fatigue Properties Based on Castillo-Canteli et al. Model
Levin VictorCM90230 Interrelation between Mechanical, Physical and Damage Parameters at Fracture of Steels
Lindner LauraCM90159 Thermal Stability, Phase Decomposition and Micro-fatigue Properties of Pulsed Electrodeposited Nanocrystalline Co-Cu
Lindström StefanCM90098 Low Cycle Fatigue Modelling of a Steam Turbine Rotor Steel
Lindström ThomasCM90112 Effect of Additive Manufacturing on Fatigue Crack Propagation of a Gas Turbine Superalloy
Litvinchuk SvetlanaCM90142 Modeling Fatigue Life of Structural Materials under Block-type Nonsymmetrical Loading
Li Bo-ShiuanCM90234 Damage Mechanisms in Highly Oriented Pyrolytic Graphite, Studied by High Temperature Nano-indentation
Li Q. M.CM90101 Parametric Study of Cohesive ITZ in Meso-scale Concrete Model
Löfler LukasCM90166 Mechanical Properties and Dislocations in CrN/TiN Superlattices from ab initio Calculations
Lopez-Crespo PabloCM90239 Plastic Zone Evaluation in a Bainitic Steel Compact Tension Specimen through X-ray Diffraction
CM90259 3D Numerical Study of the Transient Behaviour on Plasticity Induced Crack Closure
Lovrenić-Jugović MartinaCM90061 Mathematical Approach of Crack Tip Plasticity
Luňák MiroslavCM90055 Change in the Sensory Properties of Alkali Activated Slag Mortars
Lütje MartinCM90063 On the Role of Fe-content on the Damage Behavior of an Al-Si-Cu Alloy
Machů ZdeněkCM90225 Crack Propagation Analysis in Multilayer Piezoelectric Energy Harvester
Macků RobertCM90256 Microstructural Investigation of Defects in Photovoltaic Cells by the Electron Beam-induced Current Method
Madec RonanCM90203 Dislocation Dynamics Simulation of fcc Single Crystals in High Strain Rate Deformation
Majerík JozefCM90226 Investigation of Mechanical Properties of Hard Finish Turned and Grinded Surfaces
CM90227 Structure Evolution of 33NiCrMoV15 Steel after its Processing by Various Quenching Conditions
Majer ZdeněkCM90228 Influence of the Cell Geometry on the Tensile Strength of Open-cell Ceramic Foams
CM90225 Crack Propagation Analysis in Multilayer Piezoelectric Energy Harvester
Malíková LucieCM90208 Evaluation of Fracture Response of Silesian Granite Specimens via Effective Crack Model Approach and Finite Element Analysis
Maltsev DmitriyCM90254 Radiation Degradation Mechanisms of Reactor Graphites Properties
Mamonov AndreyCM90164 The Microstructure Study of the Hydrogenated Titanium Specimens Tested at High Temperature Creep for Long-term Tensile Strength
Maňák JanCM90054 ZnMg0.8Ca/Sr0.2 Ternary Alloys – the Influence of the Third Element on Material Properties
Man JiříCM90100 Mechanism of Fatigue Crack Initiation and Early Propagation in Cyclically Strained Nickel Superalloy
Maresca F.CM90241 Unravelling Micro-plasticity Mechanisms in Martensite, Ferrite, and Dual-phase Steel
Markstaedter KonstantinCM90196 Determination of Crack Initiation in an Interior Cold-weld by Combining Reverse Engineering and Digital Image Correlation Analysis
Marques BrunoCM90235 Crack Tip Mechanisms: A Numerical Analysis
Marrow JamesCM90234 Damage Mechanisms in Highly Oriented Pyrolytic Graphite, Studied by High Temperature Nano-indentation
Marx MichaelCM90266 Influence of the Load Behaviour and Selected Material Properties on the Evolution of the Plastic Zone of Fatigue Cracks by FEM Analysis
CM90178 Methodology of Acquiring Fatigue Crack Growth Curves from Micro Bending Beams as a Tool for Investigating Crack-microstructure Interactions
Mashima KatsuyaCM90210 Evaluation of Hall-Petch Coefficient with Critical Grain Boundary Shear Stress Measured by Nanoindentation in Ferritic Steel
Masumura TakuroCM90094 Dislocation Strengthening Mechanism in High Nitrogen Austenitic Steel
CM90062 Estimation of the Parameter A in Modified Williamson-Hall Equation for Martensitic Steel
CM90212 Difference in Hall-Petch Coefficient between Carbon- and Nitrogen-added Austenitic Stainless Steels
Materna AlešCM90175 Effect of Annealing at 700 °C on Hardness of Cold-formed 08Ch18N10T Steel
Máthis KristiánCM90067 Influence of the Solute Concentration on Twinning-detwinning Process in Mg-Al alloys
Matviychuk YuriyCM90141 Nanodevice Lifetime Prediction – the Challenge for Nano-and Micromechanics
Mayrhofer PaulCM90163 Understanding the Relationship between Structural and Mechanical Properties of Metastable Superlattices
CM90214 Toughness Enhanced Transition Metal Nitride Thin Films
Mazalová MartinaCM90130 Ab initio Study of Vacancies and Impurities on Grain Boundaries in fcc Ni
Mazal PavelCM90117 Acoustic Emission Response to Erosion - Corrosion and Creep Damage in Pipeline Systems
Mazánová VeronikaCM90181 Description of Short Fatigue Crack Propagation under Low Cycle Fatigue Regime in Sanicro 25 Steel
CM90131 Fatigue Crack Growth Rate in Axial, Torsional and Multiaxial Mode in 316L Austenitic Steel
Medentsov VictorCM90125 The Influence of Temperature and Stress Cycle Asymmetry at Fatigue Cracks Initiation and Propagation in Cylindrical Specimens of Ni-based Alloy EP741NP
Melin SolveigCM90091 Grain Boundary Influence on the Mechanical Response to Tensile Loading for Nano-sized Cu Beams Modelled by MD Simulations
Meng Fan-ShunCM90075 Structure and Magnetism of Grain Boundaries and Surfaces in Ferromagnetic Metals and Intermetallics
Miarka PetrCM90135 Evaluation of S355 Fatigue Properties Based on Castillo-Canteli et al. Model
Michels WilhelmCM90215 Microstructural Influences on the Fatigue Crack Initiation and Propagation Mechanisms in Hypo-eutectic Al-Si Cast Alloys
Mikula PavolCM90080 Neutron Investigation of Nitinol Stents and Massive Samples before and after PIRAC Coating
Misaka YoshitakaCM90150 Prevention of Abnormal Grain Growth at Carburizing by Induction Pre-heating
Mlikota MarijoCM90093 Physical Fatigue Modelling
Modin IvanCM90134 A Damaged Medium Model for Describing a Creep Damage Accumulation Process
Mokryakov ViacheslavCM90096 Maximal Stresses of the Longitudinal Pochhammer-Chree Waves
Molnárová OrsolyaCM90054 ZnMg0.8Ca/Sr0.2 Ternary Alloys – the Influence of the Third Element on Material Properties
Motz ChristianCM90177 Monte Carlo Simulation of Microstructure Development during Thermo-mechanical Treatment of HSLA Steels
CM90266 Influence of the Load Behaviour and Selected Material Properties on the Evolution of the Plastic Zone of Fatigue Cracks by FEM Analysis
CM90159 Thermal Stability, Phase Decomposition and Micro-fatigue Properties of Pulsed Electrodeposited Nanocrystalline Co-Cu
CM90265 How to Reinforce Pulsed Electrodeposited Nanocrystalline Nickel by Gold Nanoparticles to Improve the Microstructural Stability
CM90178 Methodology of Acquiring Fatigue Crack Growth Curves from Micro Bending Beams as a Tool for Investigating Crack-microstructure Interactions
Moverare JohanCM90191 TWIP and Fracture Behavior in a Nickel Base Alloy: At Room Temperature and Below
CM90156 Influence of Ageing on Out-of-phase Thermomechanical Fatigue of Austenitic Stainless Steels
Mücklich FrankCM90159 Thermal Stability, Phase Decomposition and Micro-fatigue Properties of Pulsed Electrodeposited Nanocrystalline Co-Cu
Munetoh ShinjiCM90103 Evaluation of Pinning Force on Edge Dislocation due to C and N Atoms in Iron by Molecular Dynamics Simulation
Náhlík LubošCM90081 Numerical Evaluation of Plasticity Induced Crack Closure in 3D Structures
CM90180 Small Crack Propagation in 316L Steel
CM90181 Description of Short Fatigue Crack Propagation under Low Cycle Fatigue Regime in Sanicro 25 Steel
CM90106 Methodology for Estimation of Residual Stresses in Hardened Railway Axle
CM90200 Crack Closure in the Near-threshold Region in Metallic Materials
CM90137 Design of Plastic Pipes Considering Content of Recycled Material
Naimark OlegCM90123 Defects Induced Multiscale Kinetics of Damage - Failure Transition under Very High Cycle Fatigue
Nakagawa YukiCM90078 Observations of Twinning and Detwinning in Magnesium Alloy by Synchrotron Radiation DCT and EBSD
Nakai YoshikazuCM90078 Observations of Twinning and Detwinning in Magnesium Alloy by Synchrotron Radiation DCT and EBSD
Nasiłowska BarbaraCM90243 Initiation and Development of 1.4539 Austenitic Steel Welded Joints Made with TIG Method and with Laser Beam
CM90244 The Influence of Shot Peening on Structure and Mechanical Properties of 5457 Aluminium Alloy Joints Welded with TIG Method
Nath AtriCM90128 A Generalized Model towards Predicting Monotonic and Cyclic Deformation Behavior of Cyclically Stable Materials
Navarro HectorCM90180 Small Crack Propagation in 316L Steel
Němeček StanislavCM90209 Fatigue Properties and Damage Mechanisms of Components Manufactured by Laser Additive Welding of H13 on H11 Steels
Nemtsev DmitriiCM90125 The Influence of Temperature and Stress Cycle Asymmetry at Fatigue Cracks Initiation and Propagation in Cylindrical Specimens of Ni-based Alloy EP741NP
Nicoletto GianniCM90069 Fatigue Properties of Materials Manufactured by Direct Metal Laser Sintering
CM90162 On the Link between As-built Surface Quality and Fatigue Behavior of Additively Manufactured Inconel 718
Nicolic VladicaCM90264 Fracture Toughness of Tungsten: Fracture Mechanism, Experiments, and Simulations
Niitsu KodaiCM90053 Single-crystal Mechanical Properties of Equiatomic CrMnFeCoNi High-entropy Alloy and its Derivative Equiatomic Quaternary and Ternary Medium-entropy Alloys
Nikitin AlexanderCM90090 Study of a Multiaxial Cyclic Loading with Determination of Critical Plane for an Arbitrary Shift of Phases
CM90088 Constitutive Equations of the Semi-microscopic Theory of Plasticity for a Multiaxial Stress State
CM90089 Continual Models of Layered and Block Media with Slippage and Delamination
Nikitin IliaCM90090 Study of a Multiaxial Cyclic Loading with Determination of Critical Plane for an Arbitrary Shift of Phases
CM90088 Constitutive Equations of the Semi-microscopic Theory of Plasticity for a Multiaxial Stress State
CM90089 Continual Models of Layered and Block Media with Slippage and Delamination
Nohal LiborCM90117 Acoustic Emission Response to Erosion - Corrosion and Creep Damage in Pipeline Systems
Nordström JoakimCM90191 TWIP and Fracture Behavior in a Nickel Base Alloy: At Room Temperature and Below
Novák MichalCM90206 Assembling Fracture Mechanics and Fatigue Strength
Novák PavelCM90105 Mechanical Alloying of Fe-Al-Si Intermetallic Compounds using Pure and Pre-alloyed Powders
Nová KateřinaCM90105 Mechanical Alloying of Fe-Al-Si Intermetallic Compounds using Pure and Pre-alloyed Powders
Nowak-Michta AnetaCM90076 Impact Analysis of Air-entraining and Superplasticizing Admixtures on Concrete Compressive Strength
Obrtlík KarelCM90100 Mechanism of Fatigue Crack Initiation and Early Propagation in Cyclically Strained Nickel Superalloy
Očenášek VladivojCM90116 Modelling the Hot Deformation Behavior of AlSi1MgMn Alloy via Flow Stress Models Utilizing Intelligent Algorithms
Ohmura TakahitoCM90210 Evaluation of Hall-Petch Coefficient with Critical Grain Boundary Shear Stress Measured by Nanoindentation in Ferritic Steel
Ohnišťová PetraCM90198 A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading
Oka YoshihiroCM90212 Difference in Hall-Petch Coefficient between Carbon- and Nitrogen-added Austenitic Stainless Steels
Ondráček JanCM90175 Effect of Annealing at 700 °C on Hardness of Cold-formed 08Ch18N10T Steel
Opěla PetrCM90116 Modelling the Hot Deformation Behavior of AlSi1MgMn Alloy via Flow Stress Models Utilizing Intelligent Algorithms
Oplt TomášCM90081 Numerical Evaluation of Plasticity Induced Crack Closure in 3D Structures
Ostapovec AndrejCM90220 Numerical Analysis of Interactions between Twins and Precipitates in hcp Alloys
Ovcharov AlexeyCM90124 The Investigation of the of Fatigue Crack Growth Mechanism in Powder Formation Ni-based Superalloy
Oweisová SabinaCM90184 An ab initio Study of Thermodynamic and Mechanical Stability of Heusler-based Fe2AlCo Polymorphs
Paidar VáclavCM90168 Two bcc-phases in Refractory High Entropy Alloys
Pallaspuro SakariCM90176 Fracture Mechanical Behaviour of 0.3C Direct-quenched and Partitioned Steels
Panin SergeyCM90118 DIC-based Investigation of Crack Growth and Fatigue Fracture in Metal Alloys under Static and Cyclic Tension
Papež NikolaCM90256 Microstructural Investigation of Defects in Photovoltaic Cells by the Electron Beam-induced Current Method
CM90258 Investigation of Structure of AlN Thin Films using Fourier-transform Infrared Spectroscopy
Papina ValentinaCM90197 Forecasting Radiation Embrittlement of VVER-1000 RPV Weld’s Metal
Papšík RomanCM90228 Influence of the Cell Geometry on the Tensile Strength of Open-cell Ceramic Foams
Papuga JanCM90074 Recent Progress in Application of Multiaxial Fatigue Criteria to Lifetime Calculations
Patriarca LucaCM90165 Strain Localizations in Notches for a Coarse-grained Ni-based Superalloy: Simulations and Experiments
CM90182 A Study on Sub-grain Strain Heterogeneities at 298K and 77K for the CoCrNi Entropy Alloy
Patriarche GillesCM90153 Properties of CdZnTe and HgCdTe Determined by Indentation
Pavlů JanaCM90184 An ab initio Study of Thermodynamic and Mechanical Stability of Heusler-based Fe2AlCo Polymorphs
CM90130 Ab initio Study of Vacancies and Impurities on Grain Boundaries in fcc Ni
CM90121 Theoretical Study of Disilicide Nanocomposites with Vacancies and Impurities
Perković S.CM90271 Determining of Paris Coefficients for Different Regions of a P460Nl1 Steel Welded Joint
Petelová PetraCM90175 Effect of Annealing at 700 °C on Hardness of Cold-formed 08Ch18N10T Steel
Petráš RomanCM90133 Cyclic Plastic Response and Damage in Superaustenitic Steel in High Temperature Cycling with Dwells and in Thermomechanical Cycling
CM90111 Effects of an Environment in Stainless Steel on the Damage Mechanisms under LCF Conditions
Petrenec MartinCM90198 A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading
Petrova VeraCM90169 A Theoretical Model for the Study of Thermal Fracture of Functionally Graded Thermal Barrier Coatings
Petruška JindřichCM90056 Drawbacks of the Lode Dependent Plasticity Model in the Prediction of Deformations under Tension
Pfeifenberger ManuelCM90264 Fracture Toughness of Tungsten: Fracture Mechanism, Experiments, and Simulations
Philippi BastianCM90177 Monte Carlo Simulation of Microstructure Development during Thermo-mechanical Treatment of HSLA Steels
Pillmeier SimonCM90218 Fatigue Crack Propagation in Elongated Ultrafine-grained Structures
Pinc JanCM90054 ZnMg0.8Ca/Sr0.2 Ternary Alloys – the Influence of the Third Element on Material Properties
CM90057 Microstructure and Mechanical Properties of Potentially Biodegradable Ternary System Zn-Mg0.8-Ca0.2
Pinter GeraldCM90104 Toughness Improvement of Brittle Polymer by Insertion of Soft Interlayers
Pippan ReinhardCM90264 Fracture Toughness of Tungsten: Fracture Mechanism, Experiments, and Simulations
CM90119 Crack Tip Plasticity Influence on Cracks Approaching Cu-Si Interface
CM90218 Fatigue Crack Propagation in Elongated Ultrafine-grained Structures
Píška MiroslavCM90198 A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading
Pizúrová NaděždaCM90087 Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles for Bio-applications
Poczklán LadislavCM90131 Fatigue Crack Growth Rate in Axial, Torsional and Multiaxial Mode in 316L Austenitic Steel
Poduška JanCM90180 Small Crack Propagation in 316L Steel
CM90181 Description of Short Fatigue Crack Propagation under Low Cycle Fatigue Regime in Sanicro 25 Steel
CM90106 Methodology for Estimation of Residual Stresses in Hardened Railway Axle
CM90137 Design of Plastic Pipes Considering Content of Recycled Material
Pokluda JaroslavCM90110 Atomistic Models of Fracture
CM90251 Ab-initio Aided Strain Gradient Elasticity Theory - an Efficient Tool in the Fracture Nanomechanics?
CM90275 Prediction of Unstable Fracture of Nanocomponents using ab initio Aided Strain Gradient Elasticity
Pokorný PavelCM90081 Numerical Evaluation of Plasticity Induced Crack Closure in 3D Structures
CM90106 Methodology for Estimation of Residual Stresses in Hardened Railway Axle
CM90200 Crack Closure in the Near-threshold Region in Metallic Materials
Polák JaroslavCM90181 Description of Short Fatigue Crack Propagation under Low Cycle Fatigue Regime in Sanicro 25 Steel
CM90133 Cyclic Plastic Response and Damage in Superaustenitic Steel in High Temperature Cycling with Dwells and in Thermomechanical Cycling
CM90111 Effects of an Environment in Stainless Steel on the Damage Mechanisms under LCF Conditions
CM90219 Effective and Internal Stresses in 713LC and Rene 41 Superalloys using Analysis of the Hysteresis Loop Shape
Polatidis EfthymiosCM90249 Multiaxial Loading of Metallic Sheets within Scanning Electron Microscope
Poloch AdamCM90209 Fatigue Properties and Damage Mechanisms of Components Manufactured by Laser Additive Welding of H13 on H11 Steels
Pratama KillangCM90159 Thermal Stability, Phase Decomposition and Micro-fatigue Properties of Pulsed Electrodeposited Nanocrystalline Co-Cu
Prates PedroCM90235 Crack Tip Mechanisms: A Numerical Analysis
Profant TomášCM90251 Ab-initio Aided Strain Gradient Elasticity Theory - an Efficient Tool in the Fracture Nanomechanics?
CM90174 Notch Tip Singularities of Elastic Piezoelectric Bi-materials
CM90275 Prediction of Unstable Fracture of Nanocomponents using ab initio Aided Strain Gradient Elasticity
Průša FilipCM90105 Mechanical Alloying of Fe-Al-Si Intermetallic Compounds using Pure and Pre-alloyed Powders
Pustaić DraganCM90061 Mathematical Approach of Crack Tip Plasticity
Radović Lj.CM90271 Determining of Paris Coefficients for Different Regions of a P460Nl1 Steel Welded Joint
Raghuvanshi Parul R.CM90151 Phonons and Lattice Thermal Conductivities of Graphene Family
Ramazanov ShikhgasanCM90258 Investigation of Structure of AlN Thin Films using Fourier-transform Infrared Spectroscopy
Ray AyanCM90138 The Role of Substructural Features on the Deformation and Fracture Behavior of bcc and fcc High Entropy Alloys
Ray Kalyan KumarCM90128 A Generalized Model towards Predicting Monotonic and Cyclic Deformation Behavior of Cyclically Stable Materials
CM90138 The Role of Substructural Features on the Deformation and Fracture Behavior of bcc and fcc High Entropy Alloys
Rek VáclavCM90186 On Automation of XFEM Computations Considering General Shapes of Cracks in Terms of the Stress Analysis of Spatial Structures
Remešová MichaelaCM90185 Thermal Cycling Behaviour of Plasma-sprayed Thermal Barrier Coatings with Pre-oxidized NiCrAlY and NiCoCrAlY Bond-coats
CM90158 Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Silicate Attack
CM90161 Influence of Isothermal Oxidation on Microstructure of YSZ and Mullite-YSZ Thermal Barrier Coatings
Rienaecker AdrianCM90196 Determination of Crack Initiation in an Interior Cold-weld by Combining Reverse Engineering and Digital Image Correlation Analysis
Robak GrzegorzCM90079 Validation of Multiaxial Fatigue Criteria Application to Lifetime Calculation of S355 Steel under Plane Stress State
Rogante MassimoCM90080 Neutron Investigation of Nitinol Stents and Massive Samples before and after PIRAC Coating
Romaner LorenzCM90264 Fracture Toughness of Tungsten: Fracture Mechanism, Experiments, and Simulations
Roy UshasiCM90138 The Role of Substructural Features on the Deformation and Fracture Behavior of bcc and fcc High Entropy Alloys
Rozumová LuciaCM90139 Environmentally Assisted Crack Initiation in Heavy Liquid Metals
Rusz StanislavCM90116 Modelling the Hot Deformation Behavior of AlSi1MgMn Alloy via Flow Stress Models Utilizing Intelligent Algorithms
Ryukhtin VasylCM90080 Neutron Investigation of Nitinol Stents and Massive Samples before and after PIRAC Coating
Řehák PetrCM90251 Ab-initio Aided Strain Gradient Elasticity Theory - an Efficient Tool in the Fracture Nanomechanics?
CM90245 Determination of Strain Gradient Elasticity Constants
Sadílek JiříCM90137 Design of Plastic Pipes Considering Content of Recycled Material
Saengdeejing ArkapolCM90242 First-principles Analysis of Structure and Stability in RFe12-based Compounds
Sausto FrancescoCM90165 Strain Localizations in Notches for a Coarse-grained Ni-based Superalloy: Simulations and Experiments
Schäfer FlorianCM90178 Methodology of Acquiring Fatigue Crack Growth Curves from Micro Bending Beams as a Tool for Investigating Crack-microstructure Interactions
Scheiber DanielCM90264 Fracture Toughness of Tungsten: Fracture Mechanism, Experiments, and Simulations
Scherbring SteffenCM90215 Microstructural Influences on the Fatigue Crack Initiation and Propagation Mechanisms in Hypo-eutectic Al-Si Cast Alloys
Schindler IvoCM90116 Modelling the Hot Deformation Behavior of AlSi1MgMn Alloy via Flow Stress Models Utilizing Intelligent Algorithms
Schmauch JörgCM90159 Thermal Stability, Phase Decomposition and Micro-fatigue Properties of Pulsed Electrodeposited Nanocrystalline Co-Cu
Schmauder SiegfriedCM90093 Physical Fatigue Modelling
CM90169 A Theoretical Model for the Study of Thermal Fracture of Functionally Graded Thermal Barrier Coatings
Sedlák PetrCM90060 Effect of Doping on Elastic Properties of Alloys Exhibiting Nanotwinning: Theory and Experiment
CM90258 Investigation of Structure of AlN Thin Films using Fourier-transform Infrared Spectroscopy
Sedmak AleksandarCM90065 Fracture and Fatigue Behaviour of Implants Made of Ti Alloys
Sedmak Simon ACM90271 Determining of Paris Coefficients for Different Regions of a P460Nl1 Steel Welded Joint
Seiner HanušCM90060 Effect of Doping on Elastic Properties of Alloys Exhibiting Nanotwinning: Theory and Experiment
Seitl StanislavCM90135 Evaluation of S355 Fatigue Properties Based on Castillo-Canteli et al. Model
Seto YukiCM90094 Dislocation Strengthening Mechanism in High Nitrogen Austenitic Steel
Shakirov IvanCM90140 The Structure of Iron Powder Aggregation Obtained by Selective Laser Melting
Shanyavskiy AndreyCM90070 Durability Diagnostic of Turbine Blades Based on Non-destructive Acoustic Emission Testing
CM90072 The Fatigue Limit of Metals as a Characteristic of the Multimodal Fatigue Life Distribution for Structural Materials
Shayanfard PejmanCM90268 Thermomechanically Transforming Notched NiTi Thin Ribbon: Effect of Martensitic Transformation on Stress and Strain Gradients
Shimada TakahiroCM90073 Fracture Criteria for Nanoscale Stress Singularity in Brittle Materials
Shiozawa DaikiCM90078 Observations of Twinning and Detwinning in Magnesium Alloy by Synchrotron Radiation DCT and EBSD
Shtrombakh YaroslavCM90197 Forecasting Radiation Embrittlement of VVER-1000 RPV Weld’s Metal
CM90254 Radiation Degradation Mechanisms of Reactor Graphites Properties
Simonsson KjellCM90098 Low Cycle Fatigue Modelling of a Steam Turbine Rotor Steel
Sinev IvanCM90230 Interrelation between Mechanical, Physical and Damage Parameters at Fracture of Steels
CM90231 The Effect of Stress Concentration and Material Structure on the Kinetics of Damage Accumulation
Siriki RaveendraCM90191 TWIP and Fracture Behavior in a Nickel Base Alloy: At Room Temperature and Below
Sistaninia MasoudCM90207 Design of Composites with Improved Fracture Toughness
Skalka PetrCM90251 Ab-initio Aided Strain Gradient Elasticity Theory - an Efficient Tool in the Fracture Nanomechanics?
Sklenička VáclavCM90136 Microstructure and Damage Processes in a Nickel-based Alloy Exposed to Molten Glass
Skotarek ChristophCM90196 Determination of Crack Initiation in an Interior Cold-weld by Combining Reverse Engineering and Digital Image Correlation Analysis
Skrzeczanowski WojciechCM90244 The Influence of Shot Peening on Structure and Mechanical Properties of 5457 Aluminium Alloy Joints Welded with TIG Method
Slámečka KarelCM90185 Thermal Cycling Behaviour of Plasma-sprayed Thermal Barrier Coatings with Pre-oxidized NiCrAlY and NiCoCrAlY Bond-coats
CM90158 Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Silicate Attack
CM90161 Influence of Isothermal Oxidation on Microstructure of YSZ and Mullite-YSZ Thermal Barrier Coatings
Slávik OndrejCM90180 Small Crack Propagation in 316L Steel
Sobola DinaraCM90256 Microstructural Investigation of Defects in Photovoltaic Cells by the Electron Beam-induced Current Method
CM90258 Investigation of Structure of AlN Thin Films using Fourier-transform Infrared Spectroscopy
Soldatenkov AlexeyCM90072 The Fatigue Limit of Metals as a Characteristic of the Multimodal Fatigue Life Distribution for Structural Materials
Solovyev ValeryCM90125 The Influence of Temperature and Stress Cycle Asymmetry at Fatigue Cracks Initiation and Propagation in Cylindrical Specimens of Ni-based Alloy EP741NP
Somani MaheshCM90176 Fracture Mechanical Behaviour of 0.3C Direct-quenched and Partitioned Steels
Sozinov AlexeiCM90060 Effect of Doping on Elastic Properties of Alloys Exhibiting Nanotwinning: Theory and Experiment
Sprengel WolfgangCM90132 High-precision Isothermal Dilatometry as a Tool for Quantitative Analysis of Precipitation Kinetics in Dilute Al-Mg-Si Alloys
Stepanova LarisaCM90143 A Computational Study of the Mixed–mode Crack Behavior by Molecular Dynamics Method and the Multi-parameter Crack Field Description of Classical Fracture Mechanics
Stetsenko NataliyaCM90141 Nanodevice Lifetime Prediction – the Challenge for Nano-and Micromechanics
Strachota AdamCM90213 Behaviour of Partially Pyrolysed Composite Reinforced by Fibres of Various Compositions
Straka LadislavCM90060 Effect of Doping on Elastic Properties of Alloys Exhibiting Nanotwinning: Theory and Experiment
Stratil LuděkCM90220 Numerical Analysis of Interactions between Twins and Precipitates in hcp Alloys
CM90229 Mechanical Properties of the Cantor‘s High Entropy Alloy with Fine Grain
Stratula BorisCM90090 Study of a Multiaxial Cyclic Loading with Determination of Critical Plane for an Arbitrary Shift of Phases
CM90088 Constitutive Equations of the Semi-microscopic Theory of Plasticity for a Multiaxial Stress State
Sumigawa TakashiCM90073 Fracture Criteria for Nanoscale Stress Singularity in Brittle Materials
Sunder RamasubbuCM90118 DIC-based Investigation of Crack Growth and Fatigue Fracture in Metal Alloys under Static and Cyclic Tension
Svobodová MarieCM90117 Acoustic Emission Response to Erosion - Corrosion and Creep Damage in Pipeline Systems
Šandera PavelCM90268 Thermomechanically Transforming Notched NiTi Thin Ribbon: Effect of Martensitic Transformation on Stress and Strain Gradients
CM90198 A Study of Crack Initiation Mechanism in the Aluminum Alloy 7475-T7351 when Tensile Loading
Šebek FrantišekCM90056 Drawbacks of the Lode Dependent Plasticity Model in the Prediction of Deformations under Tension
Šesták PetrCM90110 Atomistic Models of Fracture
CM90251 Ab-initio Aided Strain Gradient Elasticity Theory - an Efficient Tool in the Fracture Nanomechanics?
CM90201 Mechanical Properties of Interfaces in Fe-Al Nanocomposites under Complex Multiaxial Loading
Ševeček OldřichCM90228 Influence of the Cell Geometry on the Tensile Strength of Open-cell Ceramic Foams
CM90225 Crack Propagation Analysis in Multilayer Piezoelectric Energy Harvester
Šiška FilipCM90220 Numerical Analysis of Interactions between Twins and Precipitates in hcp Alloys
CM90229 Mechanical Properties of the Cantor‘s High Entropy Alloy with Fine Grain
Šittner PetrCM90268 Thermomechanically Transforming Notched NiTi Thin Ribbon: Effect of Martensitic Transformation on Stress and Strain Gradients
Škarvada PavelCM90256 Microstructural Investigation of Defects in Photovoltaic Cells by the Electron Beam-induced Current Method
Šmíd MiroslavCM90249 Multiaxial Loading of Metallic Sheets within Scanning Electron Microscope
CM90107 Fatigue Properties of B1914 Superalloy at High Temperatures
CM90108 Interaction of Fatigue and Creep in MAR-M 247 Superalloy
Šob MojmírCM90184 An ab initio Study of Thermodynamic and Mechanical Stability of Heusler-based Fe2AlCo Polymorphs
CM90194 A First-principles Study of Pressure-induced Iso-structural Transition in YN and ScN Characterized by a Reversal in their Elastic Anisotropy
CM90260 Ab-initio Study of Alloying Effect of Titanium and Carbon on Young’s Modulus of Mo5SiB2 (T2) Phase
CM90075 Structure and Magnetism of Grain Boundaries and Surfaces in Ferromagnetic Metals and Intermetallics
CM90082 Recent Achievements and Challenging Drifts in Grain Boundary Segregation
CM90193 Tensorial Elastic Properties and Stability of Interface States Associated with Sigma5(210) Grain Boundaries in Ni3(Al,Si)
CM90163 Understanding the Relationship between Structural and Mechanical Properties of Metastable Superlattices
CM90130 Ab initio Study of Vacancies and Impurities on Grain Boundaries in fcc Ni
CM90201 Mechanical Properties of Interfaces in Fe-Al Nanocomposites under Complex Multiaxial Loading
CM90121 Theoretical Study of Disilicide Nanocomposites with Vacancies and Impurities
Špirit ZbyněkCM90139 Environmentally Assisted Crack Initiation in Heavy Liquid Metals
Šulák IvoCM90234 Damage Mechanisms in Highly Oriented Pyrolytic Graphite, Studied by High Temperature Nano-indentation
CM90100 Mechanism of Fatigue Crack Initiation and Early Propagation in Cyclically Strained Nickel Superalloy
Tai Yee HCM90239 Plastic Zone Evaluation in a Bainitic Steel Compact Tension Specimen through X-ray Diffraction
Takaki SetsuoCM90103 Evaluation of Pinning Force on Edge Dislocation due to C and N Atoms in Iron by Molecular Dynamics Simulation
CM90210 Evaluation of Hall-Petch Coefficient with Critical Grain Boundary Shear Stress Measured by Nanoindentation in Ferritic Steel
CM90094 Dislocation Strengthening Mechanism in High Nitrogen Austenitic Steel
CM90062 Estimation of the Parameter A in Modified Williamson-Hall Equation for Martensitic Steel
Tatarko PeterCM90183 Nano-objects (Nanotubes, Nanosheets): Do They Toughen Brittle Matrices?
Tenkamp JochenCM90215 Microstructural Influences on the Fatigue Crack Initiation and Propagation Mechanisms in Hypo-eutectic Al-Si Cast Alloys
Teraud WalentinCM90164 The Microstructure Study of the Hydrogenated Titanium Specimens Tested at High Temperature Creep for Long-term Tensile Strength
Tesař KarelCM90084 3D Fractography of Fatigue Fractures
Thielen MatthiasCM90266 Influence of the Load Behaviour and Selected Material Properties on the Evolution of the Plastic Zone of Fatigue Cracks by FEM Analysis
Timoshevskii AndreiCM90141 Nanodevice Lifetime Prediction – the Challenge for Nano-and Micromechanics
Tinoco Hector ACM90222 Finite Element Analysis of Crack-tip Opening Displacement and Plastic Zones Considering the Cyclic Material Behavior
Tiwari AbhishekCM90104 Toughness Improvement of Brittle Polymer by Insertion of Soft Interlayers
Tkachenko SerhiiCM90185 Thermal Cycling Behaviour of Plasma-sprayed Thermal Barrier Coatings with Pre-oxidized NiCrAlY and NiCoCrAlY Bond-coats
CM90158 Failure of Gadolinium Zirconate and Yttria Stabilized Zirconia Thermal Barrier Coatings Subjected to High Temperature Calcia-Magnesia-Alumino-Silicate Attack
Todebush PatriciaCM90102 Modeling Binding Energy and Adhesive Strength in Novel Bio-active Nano Coatings on Dental Implants
Trávníček LukášCM90181 Description of Short Fatigue Crack Propagation under Low Cycle Fatigue Regime in Sanicro 25 Steel
Trunkin IgorCM90124 The Investigation of the of Fatigue Crack Growth Mechanism in Powder Formation Ni-based Superalloy
Tsuchiyama ToshihiroCM90103 Evaluation of Pinning Force on Edge Dislocation due to C and N Atoms in Iron by Molecular Dynamics Simulation
CM90210 Evaluation of Hall-Petch Coefficient with Critical Grain Boundary Shear Stress Measured by Nanoindentation in Ferritic Steel
CM90094 Dislocation Strengthening Mechanism in High Nitrogen Austenitic Steel
CM90062 Estimation of the Parameter A in Modified Williamson-Hall Equation for Martensitic Steel
CM90212 Difference in Hall-Petch Coefficient between Carbon- and Nitrogen-added Austenitic Stainless Steels
Tsukahara MasahiroCM90150 Prevention of Abnormal Grain Growth at Carburizing by Induction Pre-heating
Tsurekawa SadahiroCM90260 Ab-initio Study of Alloying Effect of Titanium and Carbon on Young’s Modulus of Mo5SiB2 (T2) Phase
Tyutin MaratCM90230 Interrelation between Mechanical, Physical and Damage Parameters at Fracture of Steels
CM90231 The Effect of Stress Concentration and Material Structure on the Kinetics of Damage Accumulation
Uemura SojiroCM90260 Ab-initio Study of Alloying Effect of Titanium and Carbon on Young’s Modulus of Mo5SiB2 (T2) Phase
Uhl AnnchristinCM90266 Influence of the Load Behaviour and Selected Material Properties on the Evolution of the Plastic Zone of Fatigue Cracks by FEM Analysis
Umeno YoshitakaCM90160 First-principles Analysis of Deformation and Fracture Properties of Semiconductors
CM90154 Coarse-grained Molecular Dynamics Simulation of Deformation and Fracture in Polycarbonate: Effect of Loading Mode, Strain Rate, Temperature and Molar Mass
Vacchieri EricaCM90165 Strain Localizations in Notches for a Coarse-grained Ni-based Superalloy: Simulations and Experiments
Vacek PetrCM90120 Interaction of Stacking Faults in Zincblende GaN Stabilized by Epitaxial Strain
Vala JiříCM90146 Computational Analysis of Crack Formation and Propagation in Quasi-brittle Fibre Reinforced Composites
CM90186 On Automation of XFEM Computations Considering General Shapes of Cracks in Terms of the Stress Analysis of Spatial Structures
Van Swygenhoven HelenaCM90249 Multiaxial Loading of Metallic Sheets within Scanning Electron Microscope
Vasco-Olmo J. M.CM90263 Characterisation of Fatigue Crack Growth using the CJP Model of Crack Tip Fields or Plastic CTOD
Vasiliev AleksandrCM90124 The Investigation of the of Fatigue Crack Growth Mechanism in Powder Formation Ni-based Superalloy
Vavro LeonaCM90208 Evaluation of Fracture Response of Silesian Granite Specimens via Effective Crack Model Approach and Finite Element Analysis
Vavro MartinCM90208 Evaluation of Fracture Response of Silesian Granite Specimens via Effective Crack Model Approach and Finite Element Analysis
Vémolová HanaCM90075 Structure and Magnetism of Grain Boundaries and Surfaces in Ferromagnetic Metals and Intermetallics
Vermeij T.CM90241 Unravelling Micro-plasticity Mechanisms in Martensite, Ferrite, and Dual-phase Steel
Veřtát PetrCM90057 Microstructure and Mechanical Properties of Potentially Biodegradable Ternary System Zn-Mg0.8-Ca0.2
Vitek VáclavCM90092 Slip Behavior of Two Interacting 1/2<111> Screw Dislocations in bcc Metals under Uniaxial Load
Vlašic FrantišekCM90117 Acoustic Emission Response to Erosion - Corrosion and Creep Damage in Pipeline Systems
Vojtek TomášCM90222 Finite Element Analysis of Crack-tip Opening Displacement and Plastic Zones Considering the Cyclic Material Behavior
CM90180 Small Crack Propagation in 316L Steel
CM90200 Crack Closure in the Near-threshold Region in Metallic Materials
Volkov IvanCM90134 A Damaged Medium Model for Describing a Creep Damage Accumulation Process
CM90142 Modeling Fatigue Life of Structural Materials under Block-type Nonsymmetrical Loading
Vosynek PetrCM90056 Drawbacks of the Lode Dependent Plasticity Model in the Prediction of Deformations under Tension
Všianská MonikaCM90260 Ab-initio Study of Alloying Effect of Titanium and Carbon on Young’s Modulus of Mo5SiB2 (T2) Phase
CM90075 Structure and Magnetism of Grain Boundaries and Surfaces in Ferromagnetic Metals and Intermetallics
CM90082 Recent Achievements and Challenging Drifts in Grain Boundary Segregation
CM90193 Tensorial Elastic Properties and Stability of Interface States Associated with Sigma5(210) Grain Boundaries in Ni3(Al,Si)
CM90130 Ab initio Study of Vacancies and Impurities on Grain Boundaries in fcc Ni
CM90201 Mechanical Properties of Interfaces in Fe-Al Nanocomposites under Complex Multiaxial Loading
CM90121 Theoretical Study of Disilicide Nanocomposites with Vacancies and Impurities
Vykoukal VítCM90087 Synthesis and Characterization of Magnetic Iron Oxide Nanoparticles for Bio-applications
Walther FrankCM90215 Microstructural Influences on the Fatigue Crack Initiation and Propagation Mechanisms in Hypo-eutectic Al-Si Cast Alloys
Wang JiamingCM90101 Parametric Study of Cohesive ITZ in Meso-scale Concrete Model
Wärner HugoCM90156 Influence of Ageing on Out-of-phase Thermomechanical Fatigue of Austenitic Stainless Steels
Weber LouisCM90265 How to Reinforce Pulsed Electrodeposited Nanocrystalline Nickel by Gold Nanoparticles to Improve the Microstructural Stability
Wiener JohannesCM90104 Toughness Improvement of Brittle Polymer by Insertion of Soft Interlayers
Withers PhilipCM90239 Plastic Zone Evaluation in a Bainitic Steel Compact Tension Specimen through X-ray Diffraction
Würschum RolandCM90132 High-precision Isothermal Dilatometry as a Tool for Quantitative Analysis of Precipitation Kinetics in Dilute Al-Mg-Si Alloys
Wurster StefanCM90264 Fracture Toughness of Tungsten: Fracture Mechanism, Experiments, and Simulations
Yankova MariaCM90064 Progress and Challenges with Local Approaches to Cleavage Fracture
Yates John RCM90239 Plastic Zone Evaluation in a Bainitic Steel Compact Tension Specimen through X-ray Diffraction
Yoshida TakuyaCM90260 Ab-initio Study of Alloying Effect of Titanium and Carbon on Young’s Modulus of Mo5SiB2 (T2) Phase
Yoshimi KyosukeCM90260 Ab-initio Study of Alloying Effect of Titanium and Carbon on Young’s Modulus of Mo5SiB2 (T2) Phase
Zatsarna OlexandraCM90171 Threshold Fracture Stress: Theory and Application
Zeismann F.CM90063 On the Role of Fe-content on the Damage Behavior of an Al-Si-Cu Alloy
Zelený MartinCM90060 Effect of Doping on Elastic Properties of Alloys Exhibiting Nanotwinning: Theory and Experiment
CM90193 Tensorial Elastic Properties and Stability of Interface States Associated with Sigma5(210) Grain Boundaries in Ni3(Al,Si)
Zhai XuedongCM90202 High-speed X-ray Visualization of Bone Fracture
Zhang ZaoliCM90214 Toughness Enhanced Transition Metal Nitride Thin Films
Zhang ZhiliangCM90240 Design and Fabrication of Super-low Ice Adhesion Surfaces
Zhukov AntonCM90140 The Structure of Iron Powder Aggregation Obtained by Selective Laser Melting
Zhurko DenisCM90197 Forecasting Radiation Embrittlement of VVER-1000 RPV Weld’s Metal
Zimina MariiaCM90179 Effect of High Temperature Water / Vapour Environments and Strain Rate on Crack Initiation of 316L Steel
Zýka JiříCM90136 Microstructure and Damage Processes in a Nickel-based Alloy Exposed to Molten Glass
Žák StanislavCM90119 Crack Tip Plasticity Influence on Cracks Approaching Cu-Si Interface


Page access: 251 To the main page Last modification: May 18, 2019.