MSMF-3 in Brno, Czech Republic
June 27 - 29, 2001
| HISTORY | COMMITTEES | OVERVIEW | SECTIONS | AUTHORS | KEYWORDS |
MSMF-3
in Brno, Czech Republic
June 27 - 29, 2001
 |
 |
 |
| Institutes of
Physical and Materials Engineering, Faculty of Mechanical Engineering, Brno University of Technology |
COST -
European Co-operation in the Field of Scientific and Technical Research |
ASM
International - Czech Chapter, Czech Society for New Materials and Technologies |
alphabeticaly ordered
| Arola R. | Image Analysis of Inclusions in Cast Carbon Steel (oral) | VIII |
| Bábor P. | Application of TOF - LEIS and XPS for Surface Studies (poster) | V |
| Barchan A. | The Influence of Loading Method of Orthotropic Composite on Fatigue Strength (poster) | VII |
| Bartík L. | Structural Aspect of Fracture in Nitrided Layers (oral) | V |
| Benesová M. | A Simplified Local Surface Photoreflectance Measurement (poster) | V |
| Besson J. | Modeling of Slant or Cup-cone Fracture of Metals (key-note) | IV |
| Besterci M. | Micrstructural Characteristics of Dispersion Strengthened Cu-based System (oral) | II |
| Boeraeve P. | Effect of Alumina and Titanium Nitrides Inclusions on Mechanical Properties in High Alloyed Steels (oral) | VIII |
| Boeraeve P. | Quantitative Description of MC, M2C, M6C and M7C3 Carbides in High Speed Steel Rolls (oral) | VIII |
| Boljanovic S. | Anomalous Fatigue Crack Growth Behaviour in AA 2024 and AA 5083 (key-note) | VII |
| Bosanský J. | Micromechanism of Cleavage Fracture in Ferritic Steels (oral) | III |
| Breskvar B. | Study of Inclusions in Technical Aluminium (oral) | VIII |
| Brocks W. | Modeling of Slant or Cup-cone Fracture of Metals (key-note) | IV |
| Broz P. | Fatigue of Steel Structures (poster) | IV |
| Brozová A. | Effect of Multiple Heat Simulation on a CGHAZ Fracture of Low Carbon Low Alloyed Steels (oral) | VIII |
| Brozová A. | Effect of Displacement Rate on Fracture Toughness of Austenite in Ductile Fracture and Stress Corrosion Cracking at Temperature of 250 oC (oral) | VII |
| Brüstlová J. | Near-Field Photoluminiscence as High Resolution Diagnostics of Semiconductor Structures (poster) | VI |
| Brezina J. | Microstructure and Anisotropy of Creep in Ti-46Al-2W-0.5Si Casting (oral) | III |
| Buirette C. | Dislocation Structure in the HAZ of HSS Steel after Shot Peening (oral) | III |
| Bumbálek B. | Thermo-mechanical Model of Shear Instability during Cutting (poster) | VI |
| Bumbálek L. | Thermo-mechanical Model of Shear Instability during Cutting (poster) | VI |
| Bursa J. | Experimental-computational Modelling of Damage of Steel Reinforced Rubber Composite (oral) | IV |
| Cejp J. | Dislocation Emission from the Crack Tip in bcc Iron (poster) | I |
| Cescotto S. | Quantitative Description of MC, M2C, M6C and M7C3 Carbides in High Speed Steel Rolls (oral) | VIII |
| Colnet L. de | Image Analysis of Inclusions in Cast Carbon Steel (oral) | VIII |
| Colnet L. de | Effect of Alumina and Titanium Nitrides Inclusions on Mechanical Properties in High Alloyed Steels (oral) | VIII |
| Colnet L. de | Quantitative Description of MC, M2C, M6C and M7C3 Carbides in High Speed Steel Rolls (oral) | VIII |
| Cadek J. | Effect of Notches on High Temperature Creep Behaviour of CMSX-4 Superalloy Single Crystals (poster) | IV |
| Cechal J. | Application of TOF - LEIS and XPS for Surface Studies (poster) | V |
| Cermák J. | Chemical Composition of (310) [100] Symmetrical Tilt Grain Boundary in Ni3Al (poster) | I |
| Cermák J. | Degradation of Protective Effect of Surface Layer on Ni3Al-Cr in Hydrogen Environment (poster) | V |
| Cerný M. | Ab initio Modelling Deformation of Perfect Cubic Crystals under Triaxial Tension (oral) | I |
| Cerný M. | Ab initio Simulation of Three-Axial Deformation of Perfect Iron Crystal (poster) | I |
| Degallaix G. | Dislocation Structure in the HAZ of HSS Steel after Shot Peening (oral) | III |
| Dlouhý A. | Microstructure and Anisotropy of Creep in Ti-46Al-2W-0.5Si Casting (oral) | III |
| Dlouhý I. | Micromechanical Aspects of Transgranular and Intergranular Failure Competition (oral) | VIII |
| Dobersek M. | Study of Inclusions in Technical Aluminium (oral) | VIII |
| Dobis P. | A Simplified Local Surface Photoreflectance Measurement (poster) | V |
| Dobis P. | Near-Field Photoluminiscence as High Resolution Diagnostics of Semiconductor Structures (poster) | VI |
| Dobrovská J. | Microheterogeneity in the Ultra-High Strength Low Alloy Steel after Three Regimes of Heat-Treatment (oral) | VIII |
| Dobrovská V. | Microheterogeneity in the Ultra-High Strength Low Alloy Steel after Three Regimes of Heat-Treatment (oral) | VIII |
| Doig A. | Dynamic Compression Testing of Metallic Materials - European Progress Towards a Test Standard (oral) | VI |
| Dvorák I. | Structural Aspect of Fracture in Nitrided Layers (oral) | V |
| Dzioba I. | The Influence of Loading Method of Orthotropic Composite on Fatigue Strength (poster) | VII |
| Ernestová M. | Effect of Displacement Rate on Fracture Toughness of Austenite in Ductile Fracture and Stress Corrosion Cracking at Temperature of 250 oC (oral) | VII |
| Fissolo A. | Mesoscopic Scale Thermal Fatigue Damage (oral) | III |
| Fivel M. | Mesoscopic Scale Thermal Fatigue Damage (oral) | III |
| Friák M. | Ab initio Simulation of Three-Axial Deformation of Perfect Iron Crystal (poster) | I |
| Friák M. | Structure and Magnetism of Iron and Iron Overlayers from the First Principles (oral) | I |
| Gerberich W. W. | Ultra Long Life Fatigue-Implication on the Conventional Threshold (oral) | VI |
| Gfhiri R. | Effect of Alumina and Titanium Nitrides Inclusions on Mechanical Properties in High Alloyed Steels (oral) | VIII |
| Gfhiri R. | Quantitative Description of MC, M2C, M6C and M7C3 Carbides in High Speed Steel Rolls (oral) | VIII |
| Gnäupel-Herold T. | Neutron Scattering in Studies of Complex Anisotropic Microstructures (key-note) | VI |
| Godec M. | Texture Development of FeSi Alloy Induced by Sb, Sn and Se Surface Segregation (poster) | VIII |
| Gontareva R. G. | Optical Topography Analysis of Single Crystals for Indirect Estimation of Deformation Damage of Aircraft Alloys under Fatigue Test (oral) | II |
| Gordienko Yu. G. | Multiscale Correlation Effects during Fatigue Damage Evolution Observed by Surface Roughness Analysis (oral) | II |
| Gordienko Yu. G. | Optical Topography Analysis of Single Crystals for Indirect Estimation of Deformation Damage of Aircraft Alloys under Fatigue Test (oral) | II |
| Grmela L. | A Simplified Local Surface Photoreflectance Measurement (poster) | V |
| Gutkin M. Yu. | Nucleation of Disclination Defects and Development of Misorientation Bands at Grain Boundary Junctions (oral) | V |
| Hadji M. | Deformation and Aging Behaviors of Fe-Mn-Al-Cr-C Duplex Alloy (poster) | VII |
| Hanák J. | Structural Aspect of Fracture in Nitrided Layers (oral) | V |
| Heger J. | FE Modelling of Particulate Composites with Brittle Matrix under Cyclic Compression Loading (poster) | IV |
| Hornak P. | Structure and Fractography Analysis of Nickel Base Superalloy Subjected to Low Cycle Fatigue (oral) | VII |
| Horníková J. | Effective Stress Intensity Factor for Crack of Intergranular Morphology (oral) | VIII |
| Horníková J. | Pyramidal Model of Intergranular Crack Front (poster) | VIII |
| Hu D. | A Review of Factors Influencing the Ductility and Failure in Some Ti and in TiAl Alloys (key-note) | VIII |
| Huang H. | Atomistic Simulation of Dislocation Dynamics (key-note) | plenary |
| Hutar P. | Two-Parameter Approach for Short Cracks at Notches (oral) | IV |
| Ilavský J. | Characterization of Anisotropic, Thermally Sprayed Microstructures using Small-angle Neutron Scattering (oral) | V |
| Ilavský J. | Neutron Scattering in Studies of Complex Anisotropic Microstructures (key-note) | VI |
| Janícek P. | Experimental-computational Modelling of Damage of Steel Reinforced Rubber Composite (oral) | IV |
| Janovec J. | Posphorus Grain Boundary Segregation in Polycrystalline Alloy Steels (oral) | VIII |
| Jenko M. | Microheterogeneity in the Ultra-High Strength Low Alloy Steel after Three Regimes of Heat-Treatment (oral) | VIII |
| Jenko M. | Texture Development of FeSi Alloy Induced by Sb, Sn and Se Surface Segregation (poster) | VIII |
| Jurkovic P. | Application of TOF - LEIS and XPS for Surface Studies (poster) | V |
| Kalousek R. | A Study of Metallic Surfaces by UHV STM (oral) | VI |
| Kanický V. | Contribution to Corrosion Fatigue Crack Initiation Modeling (poster) | II |
| Karuskevich M. V. | Optical Topography Analysis of Single Crystals for Indirect Estimation of Deformation Damage of Aircraft Alloys under Fatigue Test (oral) | II |
| Katz Y. | Ultra Long Life Fatigue-Implication on the Conventional Threshold (oral) | VI |
| Keller T. | Characterization of Anisotropic, Thermally Sprayed Microstructures using Small-angle Neutron Scattering (oral) | V |
| Klakurková L. | Failure of Al3Ni+Al Composites at Room and High Temperatures (oral) | VII |
| Klemm V. | TEM - Investigations of Cell Block Structure and Disclination Configurations in Plastically Deformed Metals (poster) | VII |
| Klimanek P. | TEM - Investigations of Cell Block Structure and Disclination Configurations in Plastically Deformed Metals (poster) | VII |
| Klimanek P. | Modelling of Metals Plasticity on the Base of Dislocation and Disclination Dynamics (oral) | III |
| Klimanek P. | Microstructure Evolution in Plastic Deformation of Fe-Si Single Crystals by Compression at Room Temperature (poster) | III |
| Klimanek P. | Microstructure Evolution in Plastic Deformation of Zirconium by Compression (poster) | III |
| Klimanek P. | Nucleation of Disclination Defects and Development of Misorientation Bands at Grain Boundary Junctions (oral) | V |
| Knésl Z. | Estimation of the Critical Stress for Failure of Protective Layers (oral) | V |
| Knésl Z. | Two-Parameter Approach for Short Cracks at Notches (oral) | IV |
| Kohout J. | Kinetics of the Changes of Physical and Mechanical Properties of Structural Materials as a Result of the Changes of their Structure (oral) | VII |
| Konecná R. | Fracture Profiles of Modificated Graphite Cast Irons and Silumins (oral) | II |
| Korcák A. | Heat Treatment of a 13Cr-6Ni-2.5Mo-Ti Supermartensitic Steel (poster) | VII |
| Kostálová D. | Near-Field Photoluminiscence as High Resolution Diagnostics of Semiconductor Structures (poster) | VI |
| Kotoul M. | FE Modelling of Particulate Composites with Brittle Matrix under Cyclic Compression Loading (poster) | IV |
| Kotoul M. | A Micromechanical Modelling of Cyclic Creep in Brittle Matrix Composites under Compressive Loading (oral) | IV |
| Kotoul M. | Modelling of Partial Debonding of Ductile Particles from Brittle Matrix in Crack Bridging Zone (poster) | IV |
| Koula V. | Contribution to Corrosion Fatigue Crack Initiation Modeling (poster) | II |
| Kranenburg K. van | Anomalous Fatigue Crack Growth Behaviour in AA 2024 and AA 5083 (key-note) | VII |
| Krasowsky A. J. | Damage Description Using Power Type Relationship (oral) | III |
| Krejcí J. | Failure of Al3Ni+Al Composites at Room and High Temperatures (oral) | VII |
| Kroc J. | Application of Molecular Dynamics Simulations to Modelling of Indentation (oral) | I |
| Kroupa F. | The Role of Microcracks in Thermally Sprayed Materials (key-note) | V |
| Kruml T. | Dislocation Structure in the HAZ of HSS Steel after Shot Peening (oral) | III |
| Kucharová K. | Microstructure and Anisotropy of Creep in Ti-46Al-2W-0.5Si Casting (oral) | III |
| Kunz L. | Fatigue Crack Intiation in FCC Single Crystals (oral) | III |
| Lauschmann H. | Textural Fractography: Application of Gibbs Random Fields (oral) | II |
| Lecomte-Beckers J. | Effect of Alumina and Titanium Nitrides Inclusions on Mechanical Properties in High Alloyed Steels (oral) | VIII |
| Lecomte-Beckers J. | Quantitative Description of MC, M2C, M6C and M7C3 Carbides in High Speed Steel Rolls (oral) | VIII |
| Lejcek P. | Posphorus Grain Boundary Segregation in Polycrystalline Alloy Steels (oral) | VIII |
| Lejcek P. | Effect of Ordering on Grain Boundary Segregation (oral) | VIII |
| Lopour F. | AFM - a Tool for a Study of Surfaces and Micro/Nanostructures (oral) | VI |
| Loretto M. H. | A Review of Factors Influencing the Ductility and Failure in Some Ti and in TiAl Alloys (key-note) | VIII |
| Lukás P. | Fatigue Crack Intiation in FCC Single Crystals (oral) | III |
| Lukás P. | Effect of Notches on High Temperature Creep Behaviour of CMSX-4 Superalloy Single Crystals (poster) | IV |
| Machová A. | Influence of Temperature on Residual Stress and Damage in bcc Iron Containing Cu Nanoparticles (oral) | I |
| Machová A. | Dislocation Emission from the Crack Tip in bcc Iron (poster) | I |
| Man J. | Quantitative Assessment of the Surface Relief in Fatigue Using AFM (oral) | V |
| Mandrino D. | Microheterogeneity in the Ultra-High Strength Low Alloy Steel after Three Regimes of Heat-Treatment (oral) | VIII |
| Mandrino D. | Texture Development of FeSi Alloy Induced by Sb, Sn and Se Surface Segregation (poster) | VIII |
| Mandrino D. | Study of Inclusions in Technical Aluminium (oral) | VIII |
| Mandziej S. T. | Microstructure and Fracture Behaviour of Cr-Mo-V Power Generation Steels (oral) | VIII |
| Margadant N. | Characterization of Anisotropic, Thermally Sprayed Microstructures using Small-angle Neutron Scattering (oral) | V |
| Matejícek J. | Neutron Scattering in Studies of Complex Anisotropic Microstructures (key-note) | VI |
| Materna A. | Three-dimensional FEM Model of the Fatigue Crack Growth in a Thick CT Specimen (oral) | IV |
| Matocha K. | Fatigue Crack Growth Behaviour in Air and Seawater of GS13MnNi6.4 Weld Joint for Fixed Offshore Structures (oral) | VI |
| Michlík P. | Three-dimensional FEM Model of the Fatigue Crack Growth in a Thick CT Specimen (oral) | IV |
| Molliková E. | Mechanical Properties of Polypropylene Filled with Magnesium Hydroxide (oral) | VII |
| Morgan N. | Dynamic Compression Testing of Metallic Materials - European Progress Towards a Test Standard (oral) | VI |
| Motylenko M. | TEM - Investigations of Cell Block Structure and Disclination Configurations in Plastically Deformed Metals (poster) | VII |
| Motylenko M. | Microstructure Evolution in Plastic Deformation of Fe-Si Single Crystals by Compression at Room Temperature (poster) | III |
| Murakami Y. | Ultra Long Life Fatigue-Implication on the Conventional Threshold (oral) | VI |
| Murakami Y. | Interactions among Microstructures, Inhomogeneities and Cracks in Metal Fatigue (key-note) | plenary |
| Náhlík L. | Estimation of the Critical Stress for Failure of Protective Layers (oral) | V |
| Nemec O. | Micromechanical Aspects of Transgranular and Intergranular Failure Competition (oral) | VIII |
| Nový Z. | Analysis of Thermomechanical Processing on Creep Deformation Behaviour of NiMoCr Superalloy (poster) | VII |
| Obrtlík K. | Quantitative Assessment of the Surface Relief in Fatigue Using AFM (oral) | V |
| Oliva V. | Three-dimensional FEM Model of the Fatigue Crack Growth in a Thick CT Specimen (oral) | IV |
| Pacholková S. | Structure and Properties of Ferrite - Bainite Steels (poster) | VII |
| Paidar V. | Properties of Interfaces Plastic Deformation in TiAl (key-note) | V |
| Pantleon W. | Modelling of Metals Plasticity on the Base of Dislocation and Disclination Dynamics (oral) | III |
| Pelikán V. | Application of Molecular Dynamics Simulations to Modelling of Indentation (oral) | I |
| Peslová F. | Experimental-computational Modelling of Damage of Steel Reinforced Rubber Composite (oral) | IV |
| Pirard E. | Effect of Alumina and Titanium Nitrides Inclusions on Mechanical Properties in High Alloyed Steels (oral) | VIII |
| Pirard E. | Quantitative Description of MC, M2C, M6C and M7C3 Carbides in High Speed Steel Rolls (oral) | VIII |
| Písacka J. | Characterization of Anisotropic, Thermally Sprayed Microstructures using Small-angle Neutron Scattering (oral) | V |
| Pokluda J. | Ab initio Modelling Deformation of Perfect Cubic Crystals under Triaxial Tension (oral) | I |
| Pokluda J. | Ab initio Simulation of Three-Axial Deformation of Perfect Iron Crystal (poster) | I |
| Pokluda J. | Microheterogeneity in the Ultra-High Strength Low Alloy Steel after Three Regimes of Heat-Treatment (oral) | VIII |
| Pokluda J. | Multiscale Correlation Effects during Fatigue Damage Evolution Observed by Surface Roughness Analysis (oral) | II |
| Pokluda J. | Effective Stress Intensity Factor for Crack of Intergranular Morphology (oral) | VIII |
| Pokluda J. | Pyramidal Model of Intergranular Crack Front (poster) | VIII |
| Polák J. | Dislocation Structure in the HAZ of HSS Steel after Shot Peening (oral) | III |
| Polák J. | Quantitative Assessment of the Surface Relief in Fatigue Using AFM (oral) | V |
| Ponízil P. | Simulated Intergranular Fracture Characteristics (oral) | II |
| Pötzsch A. | Microstructure Evolution in Plastic Deformation of Zirconium by Compression (poster) | III |
| Preclík P. | Effect of Notches on High Temperature Creep Behaviour of CMSX-4 Superalloy Single Crystals (poster) | IV |
| Prusa S. | Application of TOF - LEIS and XPS for Surface Studies (poster) | V |
| Rácek O. | Textural Fractography: Application of Gibbs Random Fields (oral) | II |
| Riemslag T. | Anomalous Fatigue Crack Growth Behaviour in AA 2024 and AA 5083 (key-note) | VII |
| Robertson C. | Mesoscopic Scale Thermal Fatigue Damage (oral) | III |
| Robinson J. S. | Microstructure and Fracture Behaviour of Cr-Mo-V Power Generation Steels (oral) | VIII |
| Robinson J. S. | Quench Cracking of the Aluminium Alloy 7010 (oral) | VIII |
| Romanov A. E. | Nucleation of Disclination Defects and Development of Misorientation Bands at Grain Boundary Junctions (oral) | V |
| Rosecký Z. | Dislocation Emission from the Crack Tip in bcc Iron (poster) | I |
| Rothová V. | Degradation of Protective Effect of Surface Layer on Ni3Al-Cr in Hydrogen Environment (poster) | V |
| Ruusuvuori K. | Image Analysis of Inclusions in Cast Carbon Steel (oral) | VIII |
| Saxl I. | Simulated Intergranular Fracture Characteristics (oral) | II |
| Saxl I. | Micrstructural Characteristics of Dispersion Strengthened Cu-based System (oral) | II |
| Seefeldt M. | Modelling of Metals Plasticity on the Base of Dislocation and Disclination Dynamics (oral) | III |
| Seitl S. | Two-Parameter Approach for Short Cracks at Notches (oral) | IV |
| Semenák J. | Structure and Fractography Analysis of Nickel Base Superalloy Subjected to Low Cycle Fatigue (oral) | VII |
| Shaniavski A. A. | Fractographic, OG'e Spectroscopic and Acoustic Emission Analyses of Rotation Plastic Deformation Processes Taking Place in Al-based Alloys around of a Crack Tip during Fatigue Cracks Growth (key-note) | VI |
| Shi S. Q. | Atomistic Simulation of Dislocation Dynamics (key-note) | plenary |
| Schindler I. | Structure and Properties of Ferrite - Bainite Steels (poster) | VII |
| Schmid M. | A Study of Metallic Surfaces by UHV STM (oral) | VI |
| Schneeweiss O. | Effect of Ordering on Grain Boundary Segregation (oral) | VIII |
| Siegman S. | Characterization of Anisotropic, Thermally Sprayed Microstructures using Small-angle Neutron Scattering (oral) | V |
| Skocovský P. | Fracture Profiles of Modificated Graphite Cast Irons and Silumins (oral) | II |
| Spousta J. | Application of TOF - LEIS and XPS for Surface Studies (poster) | V |
| Steglich D. | Modeling of Slant or Cup-cone Fracture of Metals (key-note) | IV |
| Stránský K. | Microheterogeneity in the Ultra-High Strength Low Alloy Steel after Three Regimes of Heat-Treatment (oral) | VIII |
| Svoboda M. | Microstructure and Anisotropy of Creep in Ti-46Al-2W-0.5Si Casting (oral) | III |
| Sandera P. | Ab initio Modelling Deformation of Perfect Cubic Crystals under Triaxial Tension (oral) | I |
| Sandera P. | Ab initio Simulation of Three-Axial Deformation of Perfect Iron Crystal (poster) | I |
| Sandera P. | Effective Stress Intensity Factor for Crack of Intergranular Morphology (oral) | VIII |
| Sandera P. | Pyramidal Model of Intergranular Crack Front (poster) | VIII |
| Sevc P. | Posphorus Grain Boundary Segregation in Polycrystalline Alloy Steels (oral) | VIII |
| Sikola T. | AFM - a Tool for a Study of Surfaces and Micro/Nanostructures (oral) | VI |
| Sikola T. | Application of TOF - LEIS and XPS for Surface Studies (poster) | V |
| Skoda D. | AFM - a Tool for a Study of Surfaces and Micro/Nanostructures (oral) | VI |
| Smída T. | Micromechanism of Cleavage Fracture in Ferritic Steels (oral) | III |
| Sob M. | Ab initio Simulation of Three-Axial Deformation of Perfect Iron Crystal (poster) | I |
| Sob M. | Structure and Magnetism of Iron and Iron Overlayers from the First Principles (oral) | I |
| Sustai O. | Structure and Properties of Ferrite - Bainite Steels (poster) | VII |
| Svejcar J. | Failure of Al3Ni+Al Composites at Room and High Temperatures (oral) | VII |
| Tandler M. | Study of Inclusions in Technical Aluminium (oral) | VIII |
| Taylor H. | Dynamic Compression Testing of Metallic Materials - European Progress Towards a Test Standard (oral) | VI |
| Tchoufang Tchuindjang J. | Effect of Alumina and Titanium Nitrides Inclusions on Mechanical Properties in High Alloyed Steels (oral) | VIII |
| Tchoufang Tchuindjang J. | Quantitative Description of MC, M2C, M6C and M7C3 Carbides in High Speed Steel Rolls (oral) | VIII |
| Tománek P. | A Simplified Local Surface Photoreflectance Measurement (poster) | V |
| Tománek P. | Near-Field Photoluminiscence as High Resolution Diagnostics of Semiconductor Structures (poster) | VI |
| Torkar M. | Study of Inclusions in Technical Aluminium (oral) | VIII |
| Tóth L. | Damage Description Using Power Type Relationship (oral) | III |
| Tvrdý M. | Fatigue Crack Growth Behaviour in Air and Seawater of GS13MnNi6.4 Weld Joint for Fixed Offshore Structures (oral) | VI |
| Tvrdý M. | Heat Treatment of a 13Cr-6Ni-2.5Mo-Ti Supermartensitic Steel (poster) | VII |
| Urbis R. | Modelling of Partial Debonding of Ductile Particles from Brittle Matrix in Crack Bridging Zone (poster) | IV |
| Válek R. | Microstructure and Anisotropy of Creep in Ti-46Al-2W-0.5Si Casting (oral) | III |
| Varner M. | Contribution to Corrosion Fatigue Crack Initiation Modeling (poster) | II |
| Veer F. | Anomalous Fatigue Crack Growth Behaviour in AA 2024 and AA 5083 (key-note) | VII |
| Velgosová O. | Micrstructural Characteristics of Dispersion Strengthened Cu-based System (oral) | II |
| Vitek V. | Structure and Magnetism of Iron and Iron Overlayers from the First Principles (oral) | I |
| Vitek V. | Atomic Level Modeling of Extended Defects in Crystalline Materials and Recent Developments of Atomic Interactions (key-note) | I |
| Voborný S. | Application of TOF - LEIS and XPS for Surface Studies (poster) | V |
| Vodárek V. | Heat Treatment of a 13Cr-6Ni-2.5Mo-Ti Supermartensitic Steel (poster) | VII |
| Vrchovinský V. | Analysis of Thermomechanical Processing on Creep Deformation Behaviour of NiMoCr Superalloy (poster) | VII |
| Vrchovinský V. | Structure and Fractography Analysis of Nickel Base Superalloy Subjected to Low Cycle Fatigue (oral) | VII |
| Výrostková A. | Posphorus Grain Boundary Segregation in Polycrystalline Alloy Steels (oral) | VIII |
| Výrostková A. | Microstructure and Fracture Behaviour of Cr-Mo-V Power Generation Steels (oral) | VIII |
| Vyslouzil T. | FE Modelling of Particulate Composites with Brittle Matrix under Cyclic Compression Loading (poster) | IV |
| Wagner W. | Characterization of Anisotropic, Thermally Sprayed Microstructures using Small-angle Neutron Scattering (oral) | V |
| Wangyao P. | Analysis of Thermomechanical Processing on Creep Deformation Behaviour of NiMoCr Superalloy (poster) | VII |
| Wangyao P. | Structure and Fractography Analysis of Nickel Base Superalloy Subjected to Low Cycle Fatigue (oral) | VII |
| Woo C. H. | Atomistic Simulation of Dislocation Dynamics (key-note) | plenary |
| Wu X. | A Review of Factors Influencing the Ductility and Failure in Some Ti and in TiAl Alloys (key-note) | VIII |
| Yamaguchi M. | Deformation and Fracture of PST Crystals and Directionally Solidified Ingots of TiAl-base Alloys (key-note) | plenary |
| Zasimchuk E. E. | Multiscale Correlation Effects during Fatigue Damage Evolution Observed by Surface Roughness Analysis (oral) | II |
| Zasimchuk E. E. | Optical Topography Analysis of Single Crystals for Indirect Estimation of Deformation Damage of Aircraft Alloys under Fatigue Test (oral) | II |
| Zasimchuk I. K. | Optical Topography Analysis of Single Crystals for Indirect Estimation of Deformation Damage of Aircraft Alloys under Fatigue Test (oral) | II |
| Zhu W. J. | Atomistic Simulation of Dislocation Dynamics (key-note) | plenary |
| Zrník J. | Analysis of Thermomechanical Processing on Creep Deformation Behaviour of NiMoCr Superalloy (poster) | VII |
| Zrník J. | Structure and Fractography Analysis of Nickel Base Superalloy Subjected to Low Cycle Fatigue (oral) | VII |
| Zuidema J. | Anomalous Fatigue Crack Growth Behaviour in AA 2024 and AA 5083 (key-note) | VII |
| ISO-8859-2 | CP1250 | ISO-8859-1 | ASCII |